OSHA SearchOSHA records by employer

PTF Insulation Fabricators: OSHA inspections and violations

Denison, Texas · Drywall and Insulation Contractors · NAICS 238310

1inspections
8citation items
$7,253current penalties
Apr 19, 2022last inspection

OSHA inspectors have visited PTF Insulation Fabricators in Texas one time.

It opened on Apr 19, 2022 as a planned inspection, in Denison.

In all, OSHA issued 8 citation items: 5 serious and 3 other-than-serious.

The proposed penalties came to $12,089; today they stand at $7,253, 40% less.

The rule cited most here is 1910.305 (electrical wiring methods), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. PTF Insulation Fabricators averages $7,253 across 1 cited inspection.

PTF Insulation Fabricators also files yearly injury logs with OSHA, summarized below.

PTF Insulation Fabricators: OSHA citation items per year, 2022 to 2022
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

398employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch PTF Insulation Fabricators and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345905475 OPENED APR 19, 2022Closed

Planned · Complete · Safety · 24 employees at the site · Closed Jun 17, 2022

2407 Texoma Drive, Denison, TX 75020 · Drywall and Insulation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$3,315$1,989May 16, 2022Final
Citation 1, item 2
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$3,315$1,989May 16, 2022Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$2,113$1,268May 16, 2022Final
Citation 1, item 3b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
 Serious$0$0May 16, 2022Final
Citation 1, item 4
29 CFR 1910.333(b)(2)(iv)(b) · Working near live electrical parts
 Serious$2,486$1,492May 16, 2022Final
Citation 2, item 1
29 CFR 1910.304(f)(1)(viii) · Grounding and circuit protection
 Other-than-serious$465$279May 16, 2022Final
Citation 2, item 2a
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
 Other-than-serious$395$237May 16, 2022Final
Citation 2, item 2b
29 CFR 1910.305(b)(2)(i) · Electrical wiring methods
 Other-than-serious$0$0May 16, 2022Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2021, the Denison site logged 1 recordable injury or illness among about 16 workers: 4.8 per 100 full-time workers, against a median of 2.6 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
PTF Insulation Fabricators LLC
Denison · 2021
16 104.82.6

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.304 · Grounding and circuit protection

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.333 · Working near live electrical parts

Other drywall and insulation contractors employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.