Quest Design & Fabrication, LLC: OSHA inspections and violations
Stafford, Texas · Other Millwork (including Flooring) · NAICS 321918
1inspections
4citation items
$26,718current penalties
Nov 18, 2019last inspection
OSHA inspectors have visited Quest Design & Fabrication, LLC in Texas one time.
It opened on Nov 18, 2019 on a referral, in Stafford.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $53,436; today they stand at $26,718, 50% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Quest Design & Fabrication, LLC averages $26,718 across 1 cited inspection.
Quest Design & Fabrication, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Quest Design & Fabrication, LLC and get notified the morning OSHA posts a new citation for it.
Incident on Nov 6, 2019: Employee amputates three fingers when reaching into edge ban
At 7:00 a.m. on November 6, 2019, an employee working as a machine operator for millwork facility was operating an edge banding machine. The employee opened the rear door and removed the exhaust hood covering the rotating pre-mill router heads to clean out the build-up of glue, wood dust and cuttings debris. When she reached into the machine, she contacted the 12,000 rotations per minute (rpm) blades. The employee amputated her left middle and ring fingers at the second knuckle and his left index finger at the first knuckle, requiring hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Stafford site logged 3 recordable injuries or illnesses among about 137 workers: 8.2 per 100 full-time workers, against a median of 4.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Quest
Stafford · 2020
137
3
0
8.2
4.6
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was assembling a shelf with a nail gun containing 18-gauge, 3/4-inch nails. While placing together two pieces, he lost grip of the pieces and the nail gun fired into the palm of his left hand.
An employee was operating an edge banding machine. While cleaning out the build up of glue, wood dust, and cutting debris, his left hand contacted the rotating blades resulting in amputation of the middle and ring fingers at the second knuckle and the index finger at the first knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(7)(i)(a)
(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.