OSHA SearchOSHA records by employer

R-Interests, LLC: OSHA inspections and violations

Muenster, Texas · All Other Rubber Product Manufacturing · NAICS 326299

2inspections
5citation items
$7,980current penalties
Jan 15, 2016last inspection

OSHA has inspected R-Interests, LLC 2 times in Texas since 2015.

The latest one began on Jan 15, 2016 to follow up on an earlier case, in Muenster.

Those inspections ended with 5 citation items: 5 serious.

Penalties were first proposed at $13,300 and now stand at $7,980, 40% lower after settlements or reviews.

Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and R-Interests, LLC averages $7,980 (1 cited inspection).

R-Interests, LLC: OSHA citation items per year, 2015 to 2016
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

394employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch R-Interests, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341183994 OPENED JAN 15, 2016Closed

Follow-up · Partial · Safety · 13 employees at the site · Closed Mar 8, 2016

621 W. Division Street, Muenster, TX 76252 · All Other Rubber Product Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 340196476 OPENED JAN 21, 2015Closed

Complaint · Partial · Health · 31 employees at the site · Closed Aug 3, 2015

621 W. Division Street, Muenster, TX 76252 · All Other Rubber Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
Serious$3,500$2,100Mar 2, 2015Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$3,500$2,100Mar 2, 2015Final
Citation 1, item 3a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$2,800$1,680Mar 2, 2015Final
Citation 1, item 3b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Mar 2, 2015Final
Citation 1, item 4
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Serious$3,500$2,100Mar 2, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.253 · Gas welding and cutting

OSH Act Section 5 · General Duty Clause

Other all other rubber product manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.