OSHA SearchOSHA records by employer

Rafael Rendon: OSHA inspections and violations

Waxahachie, Texas · Masonry Contractors · NAICS 238140

1inspections
5citation items
$14,748current penalties
Sep 26, 2024last inspection

OSHA has inspected Rafael Rendon once in Texas.

The inspection began on Sep 26, 2024 as a planned inspection, in Waxahachie; the case is still open.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $14,748 and still stand at $14,748.

Silica dust in construction comes up most often in these citations: 2 items under 1926.1153.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,079, and Rafael Rendon averages $14,748 (1 cited inspection).

Rafael Rendon: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Rafael Rendon again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347785099 OPENED SEP 26, 2024Open

Planned · Partial · Health · 11 employees at the site · Open

664 Red Maple Road, Waxahachie, TX 75165 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$3,687$3,687Oct 17, 2024Final
Citation 1, item 2
29 CFR 1910.134(a)(2) · Respiratory protection
 Serious$3,687$3,687Oct 17, 2024Final
Citation 1, item 3
29 CFR 1926.300(b)(1) · Tools—Hand and Power: general requirements
 Serious$3,687$3,687Oct 17, 2024Final
Citation 1, item 4a
29 CFR 1926.1153(c)(1) · Silica dust in construction
 Serious$3,687$3,687Oct 17, 2024Final
Citation 1, item 4b
29 CFR 1926.1153(d)(2)(i) · Silica dust in construction
 Serious$0$0Oct 17, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(a)(2)

(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1153 · Silica dust in construction

29 CFR 1926.1153(c)(1)

(c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

Other masonry contractors employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.