OSHA has inspected Randall Mechanical, Inc. 17 times in Florida since 1990.
The latest one began on Jul 27, 2021 on a referral, in Apopka.
Those inspections ended with 31 citation items: 20 serious, 6 repeat and 5 other-than-serious.
Penalties were first proposed at $67,024 and now stand at $35,685, 47% lower after settlements or reviews.
Hazard communication comes up most often in these citations: 8 items under 1926.59.
How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Randall Mechanical, Inc. averages $18,000 (1 cited inspection).
Randall Mechanical, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
The Wage and Hour Division has 5 cases on it since 2015, with $51,697 in back wages owed to workers.
Citation items per year, by inspection date.
Florida · latest 90 days of OSHA records
338employers cited
3 of them in the same industry
Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.
Incident on Jul 20, 2021: Employee?s finger is amputated while rolling sheet metal
At 7:00 a.m. on July 20, 2021, Employee #1 was working in the sheet metal shop fabricator department, rolling galvanized sheet metal using a crimp and bead machine. After loading a circular sheet metal sleeve onto the machine, her left middle finger, protected by a glove, was cut by the rough edge of the sheet metal. The cut penetrated the glove, resulting in an amputation of the left middle finger. Employee #1 was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Apopka site logged 1 recordable injury or illness among about 280 workers: 0.6 per 100 full-time workers, against a median of 0.6 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Randall Mechanical
Apopka · 2024
280
1
1
0.6
0.6
Randall Mechanical Inc
Apopka · 2018
678
15
1
2.1
1.8
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On July 20, 2021, an employee was rolling and cutting galvanized sheet metal using a crimp and beading machine. As the sheet metal was feeding into the machine, the sharp edge of the sheet metal cut her left middle finger resulting in medical amputation.
On 2/24/2017, an employee was changing out the hangers that hold up piping inside the pump room. As he grabbed the material, his right pointer finger was caught and crushed between the top piece of the hanger and the pipe, requiring hospitalization.
(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(a) General requirements. Employers shall select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes.
Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.