OSHA has inspected Rigidply Rafters, Inc. 5 times in Maryland since 1987.
The latest one began on May 13, 2015 after an accident, in Oakland.
Those inspections ended with 13 citation items: 7 serious and 6 other-than-serious.
Penalties were first proposed at $5,150 and now stand at $2,810, 45% lower after settlements or reviews.
Noise comes up most often in these citations: 4 items under 1910.95.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Rigidply Rafters, Inc. averages $1,080 (1 cited inspection).
Rigidply Rafters, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Maryland · latest 90 days of OSHA records
185employers cited
Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.
OSHA records show Rigidply Rafters, Inc. at 3 sites in 2 states. Together they've had 17 inspections and $93,957 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Oakland site logged 2 recordable injuries or illnesses among about 62 workers: 0.3 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 152 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Rigidply Rafters Inc.
Oakland · 2016
62
2
1
0.3
3.9
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(p)(1)
(p) Operation of the truck. (1) If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
29 CFR 1910.213(h)(3)
(3) An adjustable stop shall be provided to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations.
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.