OSHA SearchOSHA records by employer

Robinson Tools LLC: OSHA inspections and violations

Penfield, New York · Cutlery and Handtool Manufacturing · NAICS 332212

1inspections
8citation items
$4,400current penalties
Jul 30, 2015last inspection

Robinson Tools LLC has one OSHA inspection on record in New York.

OSHA opened it on Jul 30, 2015 on a referral, in Penfield.

From that inspection OSHA issued 8 citation items: 5 serious and 3 other-than-serious.

OSHA proposed $8,800 in penalties. After settlements and reviews the total is $4,400, down 50%.

Most often, OSHA cited 1910.217, mechanical power presses (5 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Robinson Tools LLC averages $4,400 over 1 cited inspection in that time.

It reported 1 severe injury to OSHA since 2015.

Robinson Tools LLC: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

359employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Robinson Tools LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340807742 OPENED JUL 30, 2015Closed

Referral · Partial · Safety · 4 employees at the site · Closed Mar 25, 2016

477 Whitney Road, Penfield, NY 14526 · Cutlery and Handtool Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
 Serious$2,000$1,000Aug 17, 2015Final
Citation 1, item 2
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$1,200$600Aug 17, 2015Final
Citation 1, item 3a
29 CFR 1910.217(c)(1)(i) · Mechanical power presses
 Serious$2,800$1,400Aug 17, 2015Final
Citation 1, item 3b
29 CFR 1910.217(d)(4) · Mechanical power presses
 Serious$0$0Aug 17, 2015Final
Citation 1, item 4
29 CFR 1910.217(c)(5)(i) · Mechanical power presses
 Serious$2,800$1,400Aug 17, 2015Final
Citation 2, item 1a
29 CFR 1910.217(e)(1)(i) · Mechanical power presses
 Other-than-serious$0$0Aug 17, 2015Final
Citation 2, item 1b
29 CFR 1910.217(e)(1)(ii) · Mechanical power presses
 Other-than-serious$0$0Aug 17, 2015Final
Citation 2, item 2
29 CFR 1910.303(g)(1)(i)(b) · Electrical equipment, general requirements
 Other-than-serious$0$0Aug 17, 2015Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jul 27, 2015, Penfield: Amputation · amputations · fingertip(s)

An employee was using a full revolution mechanical power press to assemble a small component. The employee cycled the press using a foot pedal. The employee's left index finger was in the point of operation at that time, resulting in a fingertip amputation.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.217 · Mechanical power presses

29 CFR 1910.217(c)(1)(i)

(c) Safeguarding the point of operation—(1) General requirements. (i) It shall be the responsibility of the employer to provide and insure the usage of “point of operation guards” or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. See Table O-10.

29 CFR 1910.303 · Electrical equipment, general requirements

Other cutlery and handtool manufacturing employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.