OSHA SearchOSHA records by employer

Roger Trento: OSHA inspections and violations

Milford, New Hampshire · Roofing Contractors · NAICS 238160

2inspections
10citation items
$19,140current penalties
Oct 20, 2015last inspection

Roger Trento has 2 OSHA inspections on record in New Hampshire, the first in 2011.

OSHA's last visit started on Oct 20, 2015 after a complaint, in Dover.

Across those inspections OSHA issued 10 citation items: 6 serious, 1 willful and 3 repeat.

OSHA proposed $44,280 in penalties. After settlements and reviews the total is $19,140, down 57%.

Most often, OSHA cited 1926.1053, ladders in construction (4 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Roger Trento averages $9,900 over 1 cited inspection in that time.

Roger Trento: OSHA citation items per year, 2011 to 2015
Citation items per year, by inspection date.

New Hampshire · latest 90 days of OSHA records

55employers cited

25 of them in the same industry

Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Hampshire

Checking a subcontractor, a client or your own company? Watch Roger Trento and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341001204 OPENED OCT 20, 2015Closed

Complaint · Partial · Safety · 8 employees at the site · Closed May 5, 2020

Plaza Dr., Dover, NH 03820 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1b
29 CFR 1926.1051(a) · Stairways and Ladders: general requirements
Serious$1,320$0Nov 10, 2015Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
Willful$15,400$7,700Nov 10, 2015Final
Citation 3, item 1a
29 CFR 1926.1053(b)(1) · Ladders in construction
Repeat$4,400$2,200Nov 10, 2015Final

Inspection 330924333 OPENED JUL 14, 2011Closed

Referral · Complete · Safety · 6 employees at the site · Closed Nov 7, 2016

442 Nashua Street, Milford, NH 03055 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.502(d)(15) · Fall protection systems
Serious$4,620$2,310Oct 20, 2011Final
Citation 1, item 1b
29 CFR 1926.502(d)(16)(iii) · Fall protection systems
Serious$0$0Oct 20, 2011Final
Citation 1, item 1c
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$3,300$0Oct 20, 2011Final
Citation 1, item 1d
29 CFR 1926.1053(b)(5)(i) · Ladders in construction
Serious$0$0Oct 20, 2011Final
Citation 1, item 1e
29 CFR 1926.1053(b)(9) · Ladders in construction
Serious$0$0Oct 20, 2011Final
Citation 2, item 1a
29 CFR 1926.501(b)(11) · Fall protection in construction
Repeat$9,240$6,930Oct 20, 2011Final
Citation 2, item 1b
29 CFR 1926.503(a)(1) · Fall protection training in construction
Repeat$6,000$0Oct 20, 2011Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1051 · Stairways and Ladders: general requirements

29 CFR 1926.1051(a)

(a) A stairway or ladder shall be provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(5)(i)

(5)(i) Non-self-supporting ladders shall be used at an angle such that the horizontal distance from the top support to the foot of the ladder is approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support).

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.502 · Fall protection systems

29 CFR 1926.503 · Fall protection training in construction

Other roofing contractors employers in New Hampshire

Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.