OSHA SearchOSHA records by employer

Rogers Finishing, LLC.: OSHA inspections and violations

Dalton, Georgia · Carpet and Rug Mills · NAICS 314110

1inspections
6citation items
$19,774current penalties
May 4, 2017last inspection

OSHA inspectors have visited Rogers Finishing, LLC. in Georgia one time.

It opened on May 4, 2017 on a referral, in Dalton.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $32,956; today they stand at $19,774, 40% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Rogers Finishing, LLC. averages $19,774 across 1 cited inspection.

Rogers Finishing, LLC.: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

147employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Rogers Finishing, LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342301769 OPENED MAY 4, 2017Closed

Referral · Partial · Safety · 75 employees at the site · Closed Nov 28, 2017

1001 Riverbend Rd, Dalton, GA 30721 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps

Incident on May 4, 2017: Employee falls through hole in roof and is injured

At 12:00 p.m. on May 4, 2017, Employee #1 was helping to install new metal roofing after the old roofing had rotted out. The employee fell through a hole in the roof and was hospitalized for his injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$7,605$4,563Nov 1, 2017Final
Citation 1, item 2a
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
Serious$7,605$4,563Nov 1, 2017Final
Citation 1, item 2b
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$0$0Nov 1, 2017Final
Citation 1, item 2c
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Nov 1, 2017Final
Citation 1, item 3
29 CFR 1926.760(a)(1) · Fall protection
Serious$8,873$5,324Nov 1, 2017Final
Citation 1, item 4
29 CFR 1926.761(b) · Training
Serious$8,873$5,324Nov 1, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(2)(i)

(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1926.760 · Fall protection

29 CFR 1926.761 · Training

Other carpet and rug mills employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.