Inspection 349224782 OPENED OCT 15, 2026Open
355 South Industrial Blvd, Calhoun, GA 30701 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection so far.
Shaw Industries Group, Inc. has 28 OSHA inspections on record in Georgia, the first in 1989.
OSHA's last visit started on Oct 15, 2026 on a referral, in Calhoun, and the case has not closed yet.
Across those inspections OSHA issued 12 citation items: 11 serious and 1 other-than-serious.
OSHA proposed $122,473 in penalties. After settlements and reviews the total is $88,394, down 28%.
Most often, OSHA cited 1910.147, lockout/tagout (5 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,859. Shaw Industries Group, Inc. averages $17,686 over 4 cited inspections in that time.
2 inspections on this page followed a fatal incident.
Shaw Industries Group, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 23 severe injuries to OSHA since 2015.
Georgia · latest 90 days of OSHA records
146employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Georgia
Checking a subcontractor, a client or your own company? Watch Shaw Industries Group, Inc. and get notified the morning OSHA posts a new citation for it.
Watch this company355 South Industrial Blvd, Calhoun, GA 30701 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection so far.
947 Union Grove Rd Se, Adairsville, GA 30103 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
595 Northport Pkwy, Port Wentworth, GA 31407 · Other Warehousing and Storage · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
1015 Industrial Blvd, Ringgold, GA 30736 · Other Millwork (including Flooring) · OSHA's record · Phone and website on Google Maps
Incident on Feb 2, 2022: Employee amputates fingertips in dust collection system
At 8:30 p.m. on February 2, 2022, an employee was removing dust from a dust collection system. The employee's fingers contacted a paddle device inside the system, amputating the employee's left index and middle fingertips. The employee was treated without hospitalilzation.
No citations from this inspection.
590 Northport Pkwy., Port Wentworth, GA 31407 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
2230 South Hamilton Street Ext., Dalton, GA 30722 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
Incident on Feb 21, 2021: Employee fractures arm when caught in machine rollers
At 3:45 a.m. on February 21, 2021, an employee was operating a tufting machine (Serial Number DF-52589-628). The employee's arm was caught in the machine rollers (drums). The employee was hospitalized to treat a fractured arm.
No citations from this inspection.
Plant Pw 445 Northport Pkwy., Savannah, GA 31407 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
2305 Abutment Road, Dalton, GA 30721 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
1990 Warrenton Hwy, Thomson, GA 30824 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.219(f)(1) · Belts, pulleys and power-transmission parts |
Serious | $8,051 | $4,831 | Mar 27, 2019 | Final |
Plant Pw 445 Northport Pkwy., Savannah, GA 31407 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps
Incident on Sep 4, 2018: Employee is struck by forklift and fractures three toes
At 4:35 p.m. on September 4, 2018, an employee was walking from a blind aisle while going to a bullpen at the dock side of the receiving department in a large warehouse and was struck by an electric powered forklift. The employee was hospitalized with three fractured toes.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.176(a) · Material storage and aisles |
Serious | $12,934 | $9,053 | Nov 9, 2018 | Final |
5225 Ga Hwy 411 Sw Plant 15x, Cartersville, GA 30120 · Nonwoven Fabric Mills · OSHA's record · Phone and website on Google Maps
Incident on Sep 26, 2017: Employee catches finger in conveyor belt and amputates it
At 1:15 p.m. on September 29, 2017, an employee was working at the Mega Cutter Line which was located between two Tile Turning Conveyors. The employee was clearing a tile back up in the beveling area by placing the the tiles on the floor. The employee fell forward after tripping on the tiles he just placed on the floor. As the employee attempted to catch himself, his left index finger was caught in conveyor belt that turns the tiles around for side trimming and amputated his middle finger. The employee was hospitalized.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.212(a)(3)(ii) · Machine guarding |
Other-than-serious | $6,772 | $5,417 | Dec 8, 2017 | Final |
595 Northport Parkway Suite 200, Savannah, GA 31407 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
169 Benjamin H. Hill Drive E Shaw Plant M3, Fitzgerald, GA 31750 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 OSH Act Section 5(a)(1) · General Duty Clause |
Serious | $68,591 | $51,443 | Nov 21, 2016 | Final |
5225 Highway 411 Sw, Cartersville, GA 30120 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
Incident on Apr 2, 2016 (fatal): Employee is crushed and killed between two rollers when mach
At 1:45 p.m. on April 2, 2016, an employee was working for a manufacturer of flooring material in Cartersville, GA. He was replacing a dirty tension roller with a clean one on an N1A Nip Assembly machine. He climbed on top of the chilled rollers in the N1A Nip Assembly, removed the dirty tension rod, and handed it to a coworker, his helper. The helper handed him a clean roller and then left to take the dirty one to the maintenance shop. The employee was working alone on the machine, when it started unexpectedly. Two witnesses observed the machine starting up and heard the employee scream. They then ran to the machine, where they observed the employee between the chilled rollers. He had been killed. The employee sustained crushing injuries and decapitation when he was caught in the chilled rollers on the N1A Nip Assembly. There were no witnesses to the actual incident.
No citations from this inspection.
1527 Waring Road, Dalton, GA 30722 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
1527 Waring Road, Dalton, GA 30719 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
947 Union Grove Road, Calhoun, GA 30701 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
947 Union Grove Road, Calhoun, GA 30701 · Carpet and Rug Mills · OSHA's record · Phone and website on Google Maps
Incident on Dec 20, 2003 (fatal): Employee is crushed and killed by carpet wrapping machine
Employee #1, a mechanic, was inspecting the rollers of a perpetual wrapping mach ine when a coworker, the operator of the machine, pointed out a loose bolt on th e upright. Employee #1 asked the operator to hold down the "ram in" button, whic h brings the ram in to insert the cardboard inserts into the ends of the carpet roll, while Employee #1 reached in and placed his upper body between the upright and the ram so that he could tighten the bolt. Just seconds after he started to tighten the bolt, the ram sprang back and pinned Employee #1 against the uprigh t and he was crushed and killed. The operator holding the "ram in" button claime d that he did not release the button.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.147(c)(4)(i) · Lockout/tagout |
Serious | $7,000 | $7,000 | May 20, 2004 | Closed |
| Citation 1, item 1b 29 CFR 1910.147(d)(4)(i) · Lockout/tagout |
Serious | $0 | $0 | May 20, 2004 | Closed |
| Citation 1, item 2 29 CFR 1910.147(c)(5)(i) · Lockout/tagout |
Serious | $5,000 | $2,500 | May 20, 2004 | Closed |
| Citation 1, item 3 29 CFR 1910.147(c)(7)(i) · Lockout/tagout |
Serious | $2,500 | $500 | May 20, 2004 | Closed |
2305 Lakeland Road, Dalton, GA 30722 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
902 South Hamilton St., Dalton, GA 30721 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
260 Eton Industrial Blvd., Eton, GA 30705 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
1081 Industrial Blvd., Ringgold, GA 37464 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Willingham Circle, Blue Ridge, GA 30513 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Hwy 27 Warrington-thomson Hwy, Thomson, GA 30824 · OSHA's record · Phone and website on Google Maps
Incident on Mar 9, 1994: Employee's lower arm amputated
While retrieving a package tube from a yarn twister, yarn became twisted around Employee #1's finger. Consequently, the left arm was pulled into the package tub e take-up drive shaft. The arm was amputated below the elbow.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.22(b)(1) · General requirements |
Serious | $1,125 | $200 | Mar 30, 1994 | Closed |
| Citation 1, item 2 29 CFR 1910.147(c)(1) · Lockout/tagout |
Serious | $1,500 | $800 | Mar 30, 1994 | Closed |
| Citation 1, item 3 29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts |
Serious | $4,500 | $3,500 | Mar 30, 1994 | Closed |
260 Eton Industrial Blvd., Eton, GA 30705 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
9700 Medlock Crossing, Alpharetta, GA 30202 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
East Newnan Road, Newnan, GA 30263 · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 OSH Act Section 5(a)(1) · General Duty Clause |
Serious | $4,500 | $3,150 | May 8, 1992 | Closed |
Dug Gap Road, Dalton, GA 30722 · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Dalton site logged 5 recordable injuries or illnesses among about 1,083 workers: 0.4 per 100 full-time workers, against a median of 1.9 for its industry.
| Site and year | Workers | Cases | Days-away cases | Rate | Industry median |
|---|---|---|---|---|---|
| Plant 97 Dalton · 2025 | 1,083 | 5 | 0 | 0.4 | 1.9 |
| Plant 15_1G Cartersville · 2025 | 1,240 | 27 | 11 | 2.2 | 1.9 |
| Plant WD Dalton · 2025 | 738 | 8 | 1 | 0.9 | 1.9 |
| Plant 4 Dalton · 2025 | 722 | 17 | 3 | 2.5 | 1.9 |
| Plant 22 Thomson · 2025 | 546 | 22 | 8 | 3.4 | 1.1 |
| Complex Plants 26_29_30_41_54 Dalton · 2025 | 564 | 3 | 0 | 0.5 | 2.6 |
| Plant D7 Calhoun · 2025 | 446 | 4 | 2 | 0.8 | 2.1 |
| Plant 52_1S_2S_20 Dalton · 2025 | 539 | 6 | 2 | 1.2 | 1.9 |
Included with any plan: 323 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
See plansEmployers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 23 reports on file, the 6 most recent shown.
Oct 4, 2023, Port Wentworth: Hospitalization · crushing injuries · foot (feet), unspecified
An employee was operating a standup forklift and following a training mentor that was operating another lift truck. The vehicle in front stopped and as the employee went to move out of the way, their left foot was crushed against the stopped forklift.
Sep 16, 2023, Thomson: Hospitalization · heat (thermal) burns, unspecified · multiple upper extremities locations, unspecified
An employee was troubleshooting equipment when their hand was caught on the belt and their arm was pulled in, up to the forearm. The employee was hospitalized with lacerations and steam burns to their arm(s).
Jul 14, 2023, Dalton: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
An employee entered a trailer to finalize the load for shipment. After placing the final product, a 5-gallon pail, on the floor and inspecting other items, they turned to exit the trailer. The employee misstepped and fell, striking their torso and head on the trailer floor. The employee sustained rib fractures, a collapsed lung, and a head laceration.
Mar 13, 2023, Ringgold: Amputation · amputations · fingertip(s)
An employee was working on a piece of equipment that cuts rolled finished goods. As the rolled product conveyed down the line, the employee placed the customer's shipping document into the inner core tube. As the employee was withdrawing his right hand, it was pinched between the roll's core and the frame of the equipment, resulting amputation of the ring fingertip.
Feb 3, 2023, Adairsville: Hospitalization · fractures · finger(s), fingernail(s), unspecified
On February 3, 2023, an employee was placing and adjusting dock plates when his finger was caught on a case of yarn. This prevented the dock plate from extending properly into the trailer, and it pinched and fractured three of the employee's fingers. He was hospitalized, requiring surgery.
Jan 30, 2023, Dalton: Hospitalization · fractures · multiple pelvic region locations
An employee was standing next to a stretch wrap station where rolls of backing are unloaded from a doff truck. As the employee walked between the doff truck and the wrapping table, the truck was doffing a roll of carpet backing. The roll of backing struck the employee, knocking him to the ground, and pinning one of his legs under the roll. He sustained a non-displaced fracture of the hip and pelvis.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.147(c)(1)
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.