OSHA has inspected Rolling Hills Casino 4 times in California since 2006.
The latest one began on Mar 3, 2026 after a complaint, in Corning.
Those inspections ended with 7 citation items: 5 serious and 2 other-than-serious.
Penalties were first proposed at $19,018 and now stand at $10,718, 44% lower after settlements or reviews.
Fall protection in construction comes up most often in these citations: 2 items under 1926.501.
How that compares: the median penalty per cited inspection for hotel and restaurant employers since 2015 is $1,350, and Rolling Hills Casino averages $3,587 (2 cited inspections).
Rolling Hills Casino also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,120employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Corning site logged 21 recordable injuries or illnesses among about 611 workers: 3.8 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 8 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Rolling Hills Casino
Corning · 2025
611
21
6
3.8
3.5
Rolling Hills Travel Center
Corning · 2025
24
1
0
4.3
3.5
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(g)(1)
(1) Space about electric equipment. Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment.
(2) Visual inspection. (i) Portable cord- and plug-connected equipment and flexible cord sets (extension cords) shall be visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket). Cord- and plug-connected equipment and flexible cord sets (extension cords) which remain connected once they are put in place and are not exposed to damage need not be visually inspected until they are relocated.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.