OSHA SearchOSHA records by employer

Royal Innovative Solutions, LLC: OSHA inspections and violations

Heyburn, Idaho · Dried and Dehydrated Food Manufacturing · NAICS 311423

1inspections
9citation items
$21,934current penalties
Nov 13, 2018last inspection

OSHA inspectors have visited Royal Innovative Solutions, LLC in Idaho one time.

It opened on Nov 13, 2018 on a referral, in Heyburn.

In all, OSHA issued 9 citation items: 8 serious and 1 other-than-serious.

The proposed penalties came to $29,564; today they stand at $21,934, 26% less.

The rule cited most here is 1910.147 (lockout/tagout), 4 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Royal Innovative Solutions, LLC averages $21,934 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Royal Innovative Solutions, LLC: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Idaho · latest 90 days of OSHA records

62employers cited

Get notified the morning OSHA posts each new citation in Idaho: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Idaho

Checking a subcontractor, a client or your own company? Watch Royal Innovative Solutions, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343596888 OPENED NOV 13, 2018Closed

Referral · Partial · Safety · 24 employees at the site · Closed Sep 24, 2019

1404 O Street, North Bay, Heyburn, ID 83336 · Dried and Dehydrated Food Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Nov 3, 2018: Employee amputates four fingers while cleaning auger

AT 10:45 a.m. on November 3, 2018, an employee was cleaning an auger while it was running and amputated four fingers from his left hand. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$12,934$12,934Jan 10, 2019Final
Citation 1, item 1b
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Serious$0$0Jan 10, 2019Final
Citation 1, item 1c
29 CFR 1910.147(c)(6)(ii) · Lockout/tagout
Serious$0$0Jan 10, 2019Final
Citation 1, item 1d
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$0$0Jan 10, 2019Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$9,239$5,000Jan 10, 2019Final
Citation 1, item 3a
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
Serious$7,391$4,000Jan 10, 2019Final
Citation 1, item 3b
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Jan 10, 2019Final
Citation 1, item 3c
29 CFR 1910.219(f)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Jan 10, 2019Final
Citation 2, item 1
29 CFR 1910.178(l)(1)(ii) · Forklifts and other powered industrial trucks
Other-than-serious$0$0Jan 10, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 3, 2018, Heyburn: Hospitalization, amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was cleaning a drain when her left hand came into contact with a running riser auger. Four of her fingers were amputated.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.147(c)(6)(ii)

(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.212 · Machine guarding

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other dried and dehydrated food manufacturing employers in Idaho

Alert subscribers get notified of each newly cited employer in Idaho the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.