Samuel Stamping Technologies, LLC: OSHA inspections and violations
Hermitage, Pennsylvania · Metal Service Centers and Other Metal Merchant Wholesalers · NAICS 423510
3inspections
7citation items
$7,637current penalties
Dec 16, 2022last inspection
Since 2005, OSHA inspectors have visited Samuel Stamping Technologies, LLC in Pennsylvania 3 times.
The most recent inspection opened on Dec 16, 2022, in Hermitage.
In all, OSHA issued 7 citation items: 5 serious and 2 other-than-serious.
The proposed penalties came to $12,910; today they stand at $7,637, 41% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among wholesale employers, the typical cited inspection since 2015 ends with a $3,423 penalty. Samuel Stamping Technologies, LLC averages $3,250 across 2 cited inspections.
Samuel Stamping Technologies, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
285employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Samuel Stamping Technologies, LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Hermitage site logged 0 recordable injuries or illnesses among about 30 workers: 0.0 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Samuel Stamping Technologies, LLC
Hermitage · 2019
30
0
0
0.0
2.7
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Aug 4, 2016, Hermitage: Hospitalization, amputation · amputations · fingertip(s)
An employee was changing the rolls on the slitter and had the slitter roll hoisted with a crane. The roll was crooked/off balance on one side, which caused the sling strap to loosen. As the employee straightened the sling strap, the roll dropped down and struck his fingers between the sling strap and the roll. His left-hand ring and middle fingertips were surgically amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.