Schulte Building Systems, Inc.: OSHA inspections and violations
Cullman, Alabama · Prefabricated Metal Building and Component Manufacturing · NAICS 332311
7inspections
12citation items
$55,592current penalties
Jan 30, 2024last inspection
Since 2015, OSHA inspectors have visited Schulte Building Systems, Inc. in Alabama 7 times.
The most recent inspection opened on Jan 30, 2024 on a referral, in Cullman.
In all, OSHA issued 12 citation items: 9 serious and 3 other-than-serious.
The proposed penalties came to $70,617; today they stand at $55,592, 21% less.
The rule cited most here is 1910.212 (machine guarding), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Schulte Building Systems, Inc. averages $9,265 across 6 cited inspections.
Schulte Building Systems, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 3 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Schulte Building Systems, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Schulte Building Systems, Inc. at 3 sites in 2 states. Together they've had 10 inspections and $68,592 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Oct 1, 2019: Employee amputates finger in magnetic drill machine
At 6:45 a.m. on October 1, 2019, an employee was operating a magnetic drill machine at a prefabricated metal building manufacturing facility. The employee's left hand was caught in the point of operation under the rotating bit of the drill machine. The employee incurred a partial amputation of his left ring finger, fractured his left pinky finger, and was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Cullman site logged 11 recordable injuries or illnesses among about 229 workers: 4.4 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 220 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Schulte Building Systems, Inc-Cullman
Cullman · 2025
229
11
4
4.4
3.6
Schulte Building Systems, Inc-Hueytown
Hueytown · 2025
82
2
1
2.2
3.6
Included with any plan: 12 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
A crane was moving metal beams from a conveyor. The crane did not activate the sensor on the conveyor, prompting an employee to pull on the metal beam. The employee's right ring finger was caught between the metal beam and the metal rod. The finger was amputated.
Oct 1, 2019, Cullman: Amputation · amputations · fingertip(s)
An employee was operating a magnetic drill to drill holes into flanges. After drilling and creating metal shavings, the employee utilized his left hand to wipe away the shavings. The employee's glove made contact with the drill, pulling his left hand into the drill and resulting in an amputation to the left ring fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
(2) New and existing equipment. All new overhead and gantry cranes constructed and installed on or after August 31, 1971, shall meet the design specifications of the American National Standard Safety Code for Overhead and Gantry Cranes, ANSI B30.2.0-1967, which is incorporated by reference as specified in § 1910.6.
29 CFR 1910.179(i)
(h) Hoisting equipment—(1) Sheaves. (i) Sheave grooves shall be smooth and free from surface defects which could cause rope damage.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.