OSHA SearchOSHA records by employer

Seal & Design Inc.: OSHA inspections and violations

Clarence, New York · Gasket, Packing, and Sealing Device Manufacturing · NAICS 339991

2inspections
4citation items
$13,000current penalties
Jul 27, 2023last inspection

Since 2022, OSHA inspectors have visited Seal & Design Inc. in New York 2 times.

The most recent inspection opened on Jul 27, 2023 to follow up on an earlier case, in Clarence.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $24,146; today they stand at $13,000, 46% less.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Seal & Design Inc. averages $13,000 across 1 cited inspection.

Seal & Design Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Seal & Design Inc.: OSHA citation items per year, 2022 to 2023
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

361employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Seal & Design Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346862444 OPENED JUL 27, 2023Closed

Follow-up · Partial · Safety · 115 employees at the site · Closed Aug 14, 2023

4015 Casilio Parkway, Clarence, NY 14031 · Gasket, Packing, and Sealing Device Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 346321466 OPENED NOV 3, 2022Closed

Referral · Partial · Safety · 115 employees at the site · Closed Mar 14, 2023

4015 Casilio Parkway, Clarence, NY 14031 · Gasket, Packing, and Sealing Device Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$6,340$3,000Jan 3, 2023Final
Citation 1, item 1b
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$0$0Jan 3, 2023Final
Citation 1, item 2
29 CFR 1910.212(a)(2) · Machine guarding
Serious$13,052$7,500Jan 3, 2023Final
Citation 1, item 3
29 CFR 1910.242(b) · Hand and power tools
Serious$4,754$2,500Jan 3, 2023Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Clarence site logged 3 recordable injuries or illnesses among about 146 workers: 2.3 per 100 full-time workers, against a median of 2.5 for its industry. Those cases cost 64 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Seal & Design Inc
Clarence · 2025
146 322.32.5

Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Oct 27, 2022, Clarence: Amputation · amputations · fingertip(s)

An employee's left index and middle fingertips were amputated while they were operating a grommet machine.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(7)(i)(a)

(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(2)

(2) General requirements for machine guards. Guards shall be affixed to the machine where possible and secured elsewhere if for any reason attachment to the machine is not possible. The guard shall be such that it does not offer an accident hazard in itself.

29 CFR 1910.242 · Hand and power tools

Other gasket, packing, and sealing device manufacturing employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.