SKY Climber, LLC.: OSHA inspections and violations
Delaware, Ohio · Ornamental and Architectural Metal Work Manufacturing · NAICS 332323
1inspections
5citation items
$11,087current penalties
Nov 14, 2017last inspection
OSHA has inspected SKY Climber, LLC. once in Ohio.
The inspection began on Nov 14, 2017 after a complaint, in Delaware.
That inspection ended with 5 citation items: 2 serious and 3 other-than-serious.
Penalties were first proposed at $31,412 and now stand at $11,087, 65% lower after settlements or reviews.
Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and SKY Climber, LLC. averages $11,087 (1 cited inspection).
SKY Climber, LLC. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Delaware site logged 0 recordable injuries or illnesses among about 38 workers: 0.0 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Sky Climber, LLC
Delaware · 2025
38
0
0
0.0
3.6
Included with any plan: 4 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.