OSHA SearchOSHA records by employer

SMG08, LLC: OSHA inspections and violations

Oswego, New York · Newspaper Publishers · NAICS 511110

1inspections
3citation items
$4,677current penalties
Sep 7, 2016last inspection

OSHA inspectors have visited SMG08, LLC in New York one time.

It opened on Sep 7, 2016 after a complaint, in Oswego.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $6,236; today they stand at $4,677, 25% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among media and telecom employers, the typical cited inspection since 2015 ends with a $1,800 penalty. SMG08, LLC averages $4,677 across 1 cited inspection.

SMG08, LLC: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

353employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch SMG08, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341753762 OPENED SEP 7, 2016Closed

Complaint · Partial · Safety · 32 employees at the site · Closed Feb 26, 2018

140 W. First Street, Oswego, NY 13126 · Newspaper Publishers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$6,236$4,677Sep 21, 2016Final
Citation 1, item 1b
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$0$0Sep 21, 2016Final
Citation 1, item 1c
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Sep 21, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(3)(i)

(3) Vertical and inclined belts. (i) Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section.

Other newspaper publishers employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.