Southwest Steel Processing, LLC: OSHA inspections and violations
Newport, Arkansas · Iron and Steel Mills and Ferroalloy Manufacturing · NAICS 331111
4inspections
4citation items
$19,899current penalties
Mar 14, 2024last inspection
Since 2009, OSHA inspectors have visited Southwest Steel Processing, LLC in Arkansas 4 times.
The most recent inspection opened on Mar 14, 2024 on a referral, in Newport.
In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
The proposed penalties came to $20,613; today they stand at $19,899, 3% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Southwest Steel Processing, LLC averages $13,828 across 1 cited inspection.
Southwest Steel Processing, LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
16employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Southwest Steel Processing, LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Newport site logged 2 recordable injuries or illnesses among about 95 workers: 2.1 per 100 full-time workers, against a median of 4.0 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Southwest Steel Processing
Newport · 2025
95
2
0
2.1
4.0
Southwest Steel Processing LLC
Newport · 2022
115
9
3
6.5
4.0
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
Mar 27, 2024, Newport: Hospitalization · fractures · lower leg(s)
An employee was cutting bands off steel billets when a 20-foot long billet rolled and landed on their right lower leg, resulting in a compound fracture.
Mar 12, 2024, Newport: Amputation · amputations involving bone loss · finger or thumb tip(s), nail(s)
An employee was attempting to remove bolts from the dye machine on the main press line using a torque wrench. When the trigger was pressed, their right index finger got caught between the tool and the surface of the machine, resulting in amputation at the first knuckle.
Sep 3, 2019, Newport: Hospitalization · effects of heat and light, n.e.c. · body systems
An employee was running a trim press on a forging line. His body started cramping and his supervisor took him to the break room to cool off. He later went to the hospital for dehydration.
An employee was using a ratchet puller to remove a clutch plate off a press while standing on a 10-foot portable ladder when he fell to the ground below, fracturing his left heel and right ankle.
Aug 9, 2015, Newport: Hospitalization · traumatic injuries and disorders, unspecified · nonclassifiable
An employee climbed a ladder to put a chain on the trim press. On the way up the ladder, the employee opened the electrical box of the trim press to make sure nothing was wrong with the electrical box. He did not close the door of the electrical box after checking it, but continued up the ladder to replace the chain. On the way down the ladder, after he changed the chain, the employee grazed the…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(a) General requirements. Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees.
Alert subscribers get notified of each newly cited employer in Arkansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.