Stoneworks Architectural Precast Inc: OSHA inspections and violations
Elk River, Minnesota · Other Concrete Product Manufacturing · NAICS 327390
3inspections
4citation items
$6,062current penalties
Sep 21, 2023last inspection
OSHA has inspected Stoneworks Architectural Precast Inc 3 times in Minnesota since 2013.
The latest one began on Sep 21, 2023 as a planned inspection, in Elk River.
Those inspections ended with 4 citation items: 4 serious.
Penalties were first proposed at $6,175 and now stand at $6,062, 2% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 3 items under 1910.213.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Stoneworks Architectural Precast Inc averages $5,800 (1 cited inspection).
Stoneworks Architectural Precast Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
380employers cited
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Stoneworks Architectural Precast Inc and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Elk River site logged 5 recordable injuries or illnesses among about 35 workers: 15.5 per 100 full-time workers, against a median of 3.4 for its industry. Those cases cost 65 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Stoneworks Architectural Precast
Elk River · 2023
35
5
2
15.5
3.4
Included with any plan: 4 more yearly logs from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(2)
(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.
Other other concrete product manufacturing employers in Minnesota
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.