Chippewa Falls, Wisconsin · Finish Carpentry Contractors · NAICS 238350
Strongpoint Contracting LLC has one OSHA inspection on record in Wisconsin.
OSHA opened it on Nov 20, 2025 on a referral, in Chippewa Falls.
From that inspection OSHA issued 2 citation items: 2 serious.
OSHA proposed $3,972 in penalties. After settlements and reviews the total is $2,780, down 30%.
For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Strongpoint Contracting LLC averages $2,780 over 1 cited inspection in that time.
It reported 1 severe injury to OSHA since 2015.
Want to know if OSHA cites Strongpoint Contracting LLC again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company16161 80th Ave, Chippewa Falls, WI 54729 · Finish Carpentry Contractors · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1926.20(b)(2) · Construction safety programs |
Serious | $3,972 | $2,780 | Mar 3, 2026 | Final |
| Citation 1, item 1b 29 CFR 1926.304(i)(1) · Woodworking tools |
Serious | $0 | $0 | Mar 3, 2026 | Final |
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Nov 18, 2025, Chippewa Falls: Hospitalization · cuts, lacerations, punctures without injury to internal structures · hand(s) and finger(s)
An employee was using a 10-inch table saw to cut jambs for interior doors. After finishing a cut, the saw blade contacted the top of his right hand and index finger, resulting in lacerations that required hospitalization.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1926.20(b)(2)
(2) Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.
29 CFR 1926.304(i)(1)
(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.