OSHA SearchOSHA records by employer

Sunrise Development, LLC: OSHA inspections and violations

Ellenboro, North Carolina · General Warehousing and Storage · NAICS 493110

1inspections
6citation items
$3,000current penalties
Sep 15, 2015last inspection

OSHA inspectors have visited Sunrise Development, LLC in North Carolina one time.

It opened on Sep 15, 2015 after a complaint, in Ellenboro.

In all, OSHA issued 6 citation items: 4 serious and 2 other-than-serious.

The penalties, $3,000 in total, stand where OSHA first set them.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 4 times.

Among transportation and warehousing employers, the typical cited inspection since 2015 ends with a $3,555 penalty. Sunrise Development, LLC averages $3,000 across 1 cited inspection.

Sunrise Development, LLC: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Sunrise Development, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 340933100 OPENED SEP 15, 2015Closed

Complaint · Partial · Safety · 17 employees at the site · Closed Nov 12, 2015

171 Race Path Church Road, Ellenboro, NC 28040 · General Warehousing and Storage · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$1,000$1,000Sep 30, 2015Final
Citation 1, item 1b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
 Serious$0$0Sep 30, 2015Final
Citation 1, item 2
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
 Serious$1,000$1,000Sep 30, 2015Final
Citation 1, item 3
29 CFR 1910.305(g)(2)(iii) · Electrical wiring methods
 Serious$1,000$1,000Sep 30, 2015Final
Citation 2, item 1
29 CFR 1910.178(l)(2)(ii) · Forklifts and other powered industrial trucks
 Other-than-serious$0$0Sep 30, 2015Final
Citation 2, item 2
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
 Other-than-serious$0$0Sep 30, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(2)(ii)

(ii) Training shall consist of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(4)(i)

(4) Projecting shaft ends. (i) Projecting shaft ends shall present a smooth edge and end and shall not project more than one-half the diameter of the shaft unless guarded by nonrotating caps or safety sleeves.

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.305 · Electrical wiring methods

Other general warehousing and storage employers in North Carolina

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.