Superior Production LLC: OSHA inspections and violations
Columbus, Ohio · Motor Vehicle Metal Stamping · NAICS 336370
6inspections
17citation items
$74,742current penalties
May 13, 2023last inspection
OSHA has inspected Superior Production LLC 6 times in Ohio since 2009.
The latest one began on May 13, 2023 after a fatality or catastrophe, in Columbus.
Those inspections ended with 17 citation items: 14 serious and 3 other-than-serious.
Penalties were first proposed at $133,179 and now stand at $74,742, 44% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 6 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Superior Production LLC averages $24,027 (3 cited inspections).
2 inspections on this page followed a fatal incident.
Superior Production LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on May 13, 2023 (fatal): Press operator is fatally crushed in dies of power press
At 10:11 a.m. on May 13, 2023, Employee #1 and a coworker were operating a British Clearing 450-ton part-revolution mechanical power press, Serial No. 54-BR2184-CP2245, to trim metal frame channel parts. The coworker loaded the part into the dies from the loading side of the press. The press was operated by two-handed controls. The employees processed parts for about two hours. The employees attempted to cycle the press. The coworker pressed the brake monitor reset button. As the press finished the downstroke, Employee #1 released the two-handed controls and made head and arm entry into the die area to remove the part. The press continued to cycle without stopping, crushing Employee #1 in-between the dies. The press cycled four times before coworkers disabled the press controls from the control panel. Employee #1 was fatally crushed in the dies of the press.
Incident on Sep 7, 2019: Employee degloves and fractures right hand when caught in co
At 7:30 p.m. on September 7, 2019, an employee was attempting to locate and remove a piece of scrap from a portable incline scrap conveyor belt. The employee's right hand became caught between the guide roller and the belt head pulley area of the belt. The employee sustained an abrasion, a degloved palm, and displaced fractures of the second and third metacarpal bones of the right hand. The employee was hospitalized.
Incident on Oct 23, 2017 (fatal): Employee is struck by flying steel block from a mechanical p
At 11:00 a.m. on October 23, 2017, an employee was cycling the two hand controls on a Mechanical Power Press #7 and a 16 lb steel block was used to adjust the magnet height of the press. The employee was struck in the right side of his chest and abdomen when the steel block was thrown from the press. The employee suffered multiple injuries and fractures as well as experiencing cardiopulmonary arrest. The employee was pronounced dead at 12:08 p.m.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Columbus site logged 6 recordable injuries or illnesses among about 176 workers: 3.4 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 205 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Superior Production LLC
Columbus · 2025
176
6
6
3.4
2.7
Superior Production LLC - Marion Road Plant
Columbus · 2018
153
13
6
7.6
2.7
Superior Production LLC - Fairwood Plant
Columbus · 2018
275
52
33
32.1
2.7
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On September 7, 2019, an employee was troubleshooting a conveyor belt when the conveyor belt started up, catching and injuring the employee's right hand between the drive and the belt.
May 4, 2018, Columbus: Hospitalization · cuts, lacerations · cheek(s)
On May 4, 2018, an employee was carrying a bumper to set it on a conveyor when the bumper slipped and severely lacerated his left cheek.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.