T. M. Cobb Company has 15 OSHA inspections on record in California, the first in 1988.
OSHA's last visit started on Mar 4, 2025 after an accident, in Stockton, and the case has not closed yet.
Across those inspections OSHA issued 57 citation items: 16 serious and 41 other-than-serious.
OSHA proposed $80,004 in penalties. After settlements and reviews the total is $24,964, down 69%.
Most often, OSHA cited 1910.213, woodworking machinery (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. T. M. Cobb Company averages $2,248 over 6 cited inspections in that time.
T. M. Cobb Company also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,134employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Jul 8, 2020: Employee hits head, incurs concussion in fall from truck
At 12:49 p.m. on July 8, 2020, an employee was climbing down from the cab of a truck when he missed the second step and fell to the ground. The employee hit his head on the pavement and incurred a concussion, requiring hospitalization.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3385(A)
Other-than-serious
$7,650
$700
Aug 31, 2020
Final
Inspection 340829308 OPENED JUL 30, 2015Closed
Planned · Complete · Safety · 120 employees at the site · Closed Oct 18, 2016
Incident on Sep 22, 2005: Employee amputates finger in jointer
At approximately 8:00 a.m. on September 22, 2005, an employee, a production labo rer, was performing an edge jointing operation on an 8-in. jointer, Delta DJ 20, Model Number 37-350, Serial Number 3269. The workpiece that was being edge-join ted measured 84.5-in long, by 3.56-in. high. It was lower than the fence. The bo ttom side of the workpiece measured at 1.25-in. wide. The top side of the workpi ece measured at 0.75-in. wide. The employee was to remove 0.062-in. off the bott om side of the workpiece along its entire length. At the time of the accident, t he table opening for the cutterhead was between 3.125-in. and 3.5-in. wide, that was approximately 2-in. wider than the material. Approximately 35 in. of the wo rkpiece was edged-jointed when the employee's hand slipped off the piece and con tacted the jointer's cutterhead. He sustained a partial amputation of his right fourth finger with 5-mm bone loss. The employee was transported to U S Healthwor ks in Riverside where he was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 A04
Other-than-serious
$420
$0
Dec 6, 2005
Final
Citation 2, item 1
29 CFR 4311 G
Serious
$18,000
$2,700
Dec 6, 2005
Final
Inspection 307454306 OPENED SEP 7, 2004Closed
Accident · Partial · Safety · 202 employees at the site · Closed Feb 14, 2005
Incident on Aug 24, 2004: Employee's finger is amputated while banding load
At approximately 9:00 p.m. on August 24, 2004, Employee #1, a laborer with T. M. Cobb Co., was using a FROMM battery-powered plastic strapping tool (Model Numbe r P321) to band a pallet of wooden doors together for shipping. As he was placin g an edge protector on a door under the plastic banding strap with his left hand , he activated the tool, and his left index finger became caught and squeezed be tween the banding strap and the edge protector. When Employee #1 jerked his hand to free his finger, the tip of the finger was pinched off. He was treated at th e S.S. Healthworks Clinic in Riverside, and then hospitalized at Loma Linda Univ ersity Medical Center for orthopedic surgery.
No citations from this inspection.
Inspection 307453852 OPENED JUL 14, 2004Closed
Accident · Partial · Safety · 202 employees at the site · Closed Jul 12, 2008
Incident on Jun 28, 2004: Employee amputates finger in cutter machine
At approximately 12:30 p.m. on June 26, 2004, an employee was using a NORSCO Sto ps Cutter Machine to retrim a short wooden glass stop. The employee placed his r ight hand under the plexiglass guard to hold the short piece of wood in place. H e thought his finger was clear of the cutter when he actuated the machine with i ts foot pedal. He suffered a partial amputation of his right hand index finger. A coworker provided first aid and drove the employee to the U. S. Healthworks fa cility in Riverside, for emergency medical attention. He was transferred to the Riverside Community Hospital, Riverside, where he was admitted for surgery and h ospitalized overnight.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4186 B
Serious
$18,000
$2,700
Dec 9, 2004
Final
Inspection 306356171 OPENED OCT 8, 2003Closed
Accident · Partial · Safety · 101 employees at the site · Closed Jun 23, 2004
Incident on Aug 5, 2003: Load of doors fall and injure employee
At approximately 7:30 a.m. on August 5, 2003, Employee #1 was working for the ma nufacturer and distributor of residential window and door products. The elements involved in this case were wood, solid and hollow core, exterior doors. These d oors are loaded by hand versus a palletized unit of doors loaded using a forklif t. These doors are stacked individually and up-right in the trailers and secured for transport. There were two stacks in this case. These stacks are called hand loads. The first stack was approximately 4-ft deep and contained approximately twenty doors, some of which were hollow core. The second hand stack was approxim ately 5-ft deep and had approximately thirty doors in it. Several of them were s olid core doors. This truck had been loaded elsewhere and sent to this facility for distribution. They had been tied inside the trailer with rope that was attac hed to the wall of the trailer as opposed to ratchet style tie-down. Employee #1 was preparing to take a load of doors for distribution. When Employee #1 checke d the enclosed trailer to be sure that the load was secure, he found that the lo ads had shifted during transport. Employee #1 entered the trailer and began to s tand the doors upright and secure them with the rope. Approximately 10 minutes l ater a coworker went to the rear of the trailer where Employee #1 was working to tell Employee #1 that he was going to be leaving the yard. The coworker found t hat hand load number two had fallen onto Employee #1 and Employee #1 was unconsc ious and pinned under the doors. Employee #1 suffered spinal injuries and was ho spitalized.
No citations from this inspection.
Inspection 300861812 OPENED APR 2, 2003Closed
Accident · Partial · Safety · 35 employees at the site · Closed Aug 4, 2003
Incident on Mar 18, 2003: Employee's finger amputated by saw blade
At approximately 12:40 p.m. on March 18, 2003, Employee #1, a machine operator, was operating a Delta Unisaw to cut a piece of oak when the wood bound up and th e saw kicked back. The index finger on his right hand was amputated by the saw b lade and he was transported to US Healthworks in Riverside, CA for emergency med ical care.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3400 C
Other-than-serious
$750
$750
Jul 25, 2003
Closed
Inspection 119904076 OPENED NOV 9, 1994Closed
Accident · Partial · Safety · 55 employees at the site · Closed May 23, 2007
Incident on Nov 4, 1994: Employee cut right hand while using a chop saw
At approximately 9:40 a.m. on November 4, 1994, Employee #1, a production worker , was using a CTD Cut Off saw, model #M225, serial #1682. He states that he was holding a piece of wood with his left hand and that he had placed his right hand on the lever to pull down the saw blade, which is covered by a guard. His right hand slipped off the handle and somehow went under the guard into the blade. He sustained a cut between the thumb and index finger of his right hand. 911 was c alled and he was transported by Pruner Ambulance Service to Pleasant Valley Hosp ital, where he was treated and released. When questioned on how this event occur red, Employee #1 stated that he did not know how his right hand was cut when he was using his right hand to pull down the saw blade. The employer will be cited under T8CCR 3203 for inadequate training.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203 A03
Other-than-serious
$5,000
$375
May 1, 1995
Final
Inspection 106775778 OPENED MAY 10, 1988Closed
Planned · Complete · Safety · 50 employees at the site · Closed Aug 16, 1988
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the San Bernardino site logged 0 recordable injuries or illnesses among about 104 workers: 0.0 per 100 full-time workers, against a median of 4.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Haley Bros. San Bernardino
San Bernardino · 2024
104
0
0
0.0
4.6
TMC Distribution and Corporate
Riverside · 2024
114
2
1
2.4
4.6
Millwork and Jambs
San Bernardino · 2024
73
1
0
1.3
4.6
TMC Production
Riverside · 2024
62
2
2
3.6
4.6
Haley Bros. Riverview
San Bernardino · 2024
42
3
1
8.2
4.6
Haley Bros. Stockton
Stockton · 2024
36
6
1
17.6
4.6
Included with any plan: 6 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) The employer shall assure that portable fire extinguishers are maintained in a fully charged and operable condition and kept in their designated places at all times except during use.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(f)(2)
(2) The storage and handling of liquefied petroleum gas fuel shall be in accordance with NFPA Storage and Handling of Liquefied Petroleum Gases (NFPA No. 58-1969), which is incorporated by reference as specified in § 1910.6.
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.