The Model Group, Inc.: OSHA inspections and violations
Van Wert, Ohio · Commercial and Institutional Building Construction · NAICS 236220
3inspections
5citation items
$8,301current penalties
Dec 21, 2021last inspection
Since 2010, OSHA inspectors have visited The Model Group, Inc. in Ohio 3 times.
The most recent inspection opened on Dec 21, 2021 on a referral, in Van Wert.
In all, OSHA issued 5 citation items: 5 serious.
The proposed penalties came to $14,102; today they stand at $8,301, 41% less.
The rule cited most here is 1926.1153 (silica dust in construction), 4 times.
Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. The Model Group, Inc. averages $5,801 across 1 cited inspection.
The Model Group, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
6 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Sep 15, 2010: Skid steer loader operator sustains laceration in fall
On September 15, 2010, as an employee was operating a skid steer loader in a cou rtyard between two sections of the same building, the concrete grade beneath the loader collapsed. The loader and its operator fell approximately 12 feet to the floor below. The employee sustained a laceration on his back. He was hospitaliz ed.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Cincinnati site logged 4 recordable injuries or illnesses among about 131 workers: 3.3 per 100 full-time workers, against a median of 0.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
The Model Group (BWkly)
Cincinnati · 2025
131
4
0
3.3
0.1
The Model Group, Inc (Weekly)
Cincinnati · 2025
19
0
0
0.0
1.7
The Model Group Inc
Cincinnati · 2022
83
0
0
0.0
0.1
Included with any plan: 5 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.
29 CFR 1926.1153(d)(1)
(1) Permissible exposure limit (PEL). The employer shall ensure that no employee is exposed to an airborne concentration of respirable crystalline silica in excess of 50 µg/m 3, calculated as an 8-hour TWA.
29 CFR 1926.1153(e)(1)
(e) Respiratory protection—(1) General. Where respiratory protection is required by this section, the employer must provide each employee an appropriate respirator that complies with the requirements of this paragraph and 29 CFR 1910.134. Respiratory protection is required:
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.