Thorp Equipment, Inc.: OSHA inspections and violations
Thorp, Wisconsin · Fabricated Structural Metal Manufacturing · NAICS 332312
6inspections
33citation items
$18,732current penalties
Nov 9, 2018last inspection
Thorp Equipment, Inc. has 6 OSHA inspections on record in Wisconsin, the first in 1993.
OSHA's last visit started on Nov 9, 2018 after a complaint, in Thorp.
Across those inspections OSHA issued 33 citation items: 23 serious and 10 other-than-serious.
OSHA proposed $32,117 in penalties. After settlements and reviews the total is $18,732, down 42%.
Most often, OSHA cited 1910.147, lockout/tagout (10 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Thorp Equipment, Inc. averages $2,094 over 2 cited inspections in that time.
Thorp Equipment, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Incident on Nov 24, 2010: Employee's fingers are crushed by dies, later amputated
At approximately 11:55 a.m. on November 24, 2010, Employee #1, a 22-year-old pre ss brake operator, was working alone for his employer, a manufacturer of structu ral metal, located in Thorp, WI. Employee #1, who had been employed as a press b rake operator for approximately two months, was checking the die alignment on th e "# 5", 90-ton, Model Number 810-L mechanical press brake manufactured by Chica go Dreis & Krump. Employee #1 had operated the # 5 press brake several times. Th is mechanical press brake was equipped with and could be operated with electrica l foot controls and pedestal-mounted two-hand controls and an air brake/clutch s ystem, so that the ram could be stopped during the cycle by releasing the contro ls. This press brake did not have point of operation guarding and the ram could not be raised again unless the cycle was completed or the ram was manually raise d by using the setup/adjustment controls. Employee #1 was using a side-by-side s etup, with two different die setups in the press brake, to accomplish separate b end angles on stainless steel parts. He had been bending parts but stopped produ ction operations because he thought the upper right die and lower left die sets were contacting one another. To check the die alignment, Employee #1 leaned towa rds the die sets and placed his left hand against the lower left die. Employee # 1 was looking at clearance between the upper right die and lower left die, while lowering the dies into position with the foot controls, and crushed three left- hand fingers (pinkie, ring, and middle) between the upper and lower die sets. As a result of these injuries, Employee #1 was hospitalized and all three crushed fingers were surgically amputated.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Thorp site logged 2 recordable injuries or illnesses among about 108 workers: 1.8 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Thorp Equipment Inc
Thorp · 2025
108
2
0
1.8
3.6
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On July 28, 2020, an employee was moving a piece of steel on his workbench. The steel shifted and struck him in the face, lacerating his cheek.
Oct 7, 2016, Thorp: Amputation · amputations · fingertip(s)
On October 7, 2016, an employee was operating a press brake to bend metal material when the left index fingertip became caught between the material and the front of the machine. A small portion of the finger had to be surgically amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(3) How quickly must each injury or illness be recorded? You must enter each recordable injury or illness on the OSHA 300 Log and 301 Incident Report within seven (7) calendar days of receiving information that a recordable injury or illness has occurred.
(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:
29 CFR 1910.1200(f)(5)(i)
(5) Transportation. (i) Chemical manufacturers, importers, or distributors shall ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked in accordance with this section in a manner which does not conflict with the requirements of the Hazardous Materials Transportation Act (49 U.S.C. 5101 et seq.) and regulations issued under that Act by the Department of Transportation (49 CFR subtitle B).
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.