OSHA SearchOSHA records by employer

Todpat, LLC: OSHA inspections and violations

Odessa, Texas · Drilling Oil and Gas Wells · NAICS 213111

1inspections
4citation items
$11,000current penalties
Sep 9, 2022last inspection

OSHA has inspected Todpat, LLC once in Texas.

The inspection began on Sep 9, 2022 after a fatality or catastrophe, in Odessa.

That inspection ended with 4 citation items: 1 serious and 3 other-than-serious.

Penalties were first proposed at $15,746 and now stand at $11,000, 30% lower after settlements or reviews.

Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.

How that compares: the median penalty per cited inspection for mining and oil and gas employers since 2015 is $2,880, and Todpat, LLC averages $11,000 (1 cited inspection).

1 inspection on this page followed a fatal incident.

Todpat, LLC: OSHA citation items per year, 2022 to 2022
Citation items per year, by inspection date.

Want to know if OSHA cites Todpat, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346206816 OPENED SEP 9, 2022Closed

Fatality or catastrophe · Partial · Safety · 13 employees at the site · Closed Dec 11, 2023

Powell 33-6, Odessa, TX 79760 · Drilling Oil and Gas Wells · OSHA's record · Phone and website on Google Maps

Incident on Sep 8, 2022 (fatal): Employee is killed when struck by oil rig pump jack

At 5:00 p.m. on September 8, 2022, an employee was using a hammer to remove wrist pins from the counterweights of the pump jack while at an oil well. The counterweights began rolling while the employee was removing the wrist pins, causing the employee to be struck by the moving part and caught in the rotating equipment. The employee was killed.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
 Other-than-serious$5,801$4,000Dec 8, 2022Final
Citation 1, item 2 Serious$5,801$5,000Dec 8, 2022Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Other-than-serious$4,144$2,000Dec 8, 2022Final
Citation 1, item 3b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
 Other-than-serious$0$0Dec 8, 2022Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)(b)

(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(3)(i)

(3) Vertical and inclined belts. (i) Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section.

29 CFR 1910.28 · Fall protection in general industry

Other drilling oil and gas wells employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.