Arcade, New York · Aluminum Foundries (except Die-Casting) · NAICS 331524
6inspections
17citation items
$28,324current penalties
May 25, 2022last inspection
Since 2006, OSHA inspectors have visited Tpi Arcade, Inc. in New York 6 times.
The most recent inspection opened on May 25, 2022 on a referral, in Arcade.
In all, OSHA issued 17 citation items: 9 serious and 8 other-than-serious.
The proposed penalties came to $39,623; today they stand at $28,324, 29% less.
The rule cited most here is 1910.212 (machine guarding), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Tpi Arcade, Inc. averages $8,674 across 2 cited inspections.
1 inspection on this page followed a fatal incident.
Tpi Arcade, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Incident on May 17, 2018 (fatal): Employee is killed when struck by overhead duct
At 1:15 p.m. on May 17, 2018, Employee #1 was performing end of shift cleanup. As the employee worked, the 16 inch overhead duct used for the dust collection unit, collapsed onto the employee. Employee #1 was crushed and killed.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Arcade site logged 0 recordable injuries or illnesses among about 82 workers: 0.0 per 100 full-time workers, against a median of 5.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
TPi Arcade LLC
Arcade · 2025
82
0
0
0.0
5.4
TPi Arcade, LLC.
Arcade · 2023
81
6
2
6.1
5.4
TPi Arcade, Inc
Arcade · 2022
96
11
5
10.8
5.4
TPi Arcade, Inc.
Arcade · 2021
78
2
0
2.8
5.4
Included with any plan: 2 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
May 22, 2022, Arcade: Hospitalization · fractures · skull
An employee was walking to the other side of the mold transfer shuttle and their head got crushed between the mold transfer shuttle and support I beam when the shuttle was moving away from the machine. The employee suffered a fractured skull.
May 17, 2018, Arcade: Hospitalization · soreness, pain, hurt-nonspecified injury · head and trunk
An employee was performing end-of-shift cleanup near an overhead dust collection pipe, which collected steel shot from a blast machine and delivered dust and dust particles to the dust collector. The pipe broke free from its connecting joint, striking the employee in the back and head.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Basic requirement. Each employer required by this part to keep records of fatalities, injuries, and illnesses must record each fatality, injury and illness that:
(3) How do I record a work-related injury or illness that results in days away from work? When an injury or illness involves one or more days away from work, you must record the injury or illness on the OSHA 300 Log with a check mark in the space for cases involving days away and an entry of the number of calendar days away from work in the number of days column. If the employee is out for an extended period of time, you must enter an estimate of the days that the employee will be away, and update the day count when the actual number of days is known.
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
29 CFR 1910.124 · General requirements for dipping and coating operations
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.