OSHA has inspected Trelleborg Coated Systems US, Inc. 2 times in North Carolina since 2008.
The latest one began on Aug 5, 2022 after a complaint, in Rutherfordton.
Those inspections ended with 8 citation items: 2 serious and 6 other-than-serious.
Penalties were first proposed at $612 and now stand at $367, 40% lower after settlements or reviews.
Electrical wiring methods comes up most often in these citations: 2 items under 1910.305.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Trelleborg Coated Systems US, Inc. averages $0 (1 cited inspection).
Trelleborg Coated Systems US, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
North Carolina · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Trelleborg Coated Systems US, Inc. and get notified the morning OSHA posts a new citation for it.
OSHA records show Trelleborg Coated Systems US, Inc. at 2 sites in 2 states. Together they've had 5 inspections and $18,931 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Rutherfordton site logged 4 recordable injuries or illnesses among about 253 workers: 1.4 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Trelleborg Coated Systems US, Inc. - Rutherfordton Plant
Rutherfordton · 2018
253
4
1
1.4
2.6
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(5) Transportation. (i) Chemical manufacturers, importers, or distributors shall ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked in accordance with this section in a manner which does not conflict with the requirements of the Hazardous Materials Transportation Act (49 U.S.C. 5101 et seq.) and regulations issued under that Act by the Department of Transportation (49 CFR subtitle B).
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(h) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.
Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.