OSHA SearchOSHA records by employer

Triangle Metalworks, Inc.: OSHA inspections and violations

Youngsville, North Carolina · Sheet Metal Work Manufacturing · NAICS 332322

1inspections
9citation items
$4,725current penalties
Sep 17, 2020last inspection

OSHA inspectors have visited Triangle Metalworks, Inc. in North Carolina one time.

It opened on Sep 17, 2020 as a planned inspection, in Youngsville.

In all, OSHA issued 9 citation items: 8 serious and 1 other-than-serious.

The proposed penalties came to $6,300; today they stand at $4,725, 25% less.

The rule cited most here is 1910.212 (machine guarding), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Triangle Metalworks, Inc. averages $4,725 across 1 cited inspection.

Triangle Metalworks, Inc.: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

234employers cited

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch Triangle Metalworks, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344932041 OPENED SEP 17, 2020Closed

Planned · Partial · Safety · 12 employees at the site · Closed Jan 19, 2022

30 Winash Way, Youngsville, NC 27596 · Sheet Metal Work Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$1,500$1,125Mar 15, 2021Final
Citation 1, item 1b
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$0$0Mar 15, 2021Final
Citation 1, item 1c
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$0$0Mar 15, 2021Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$1,500$1,125Mar 15, 2021Final
Citation 1, item 3
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$1,500$1,125Mar 15, 2021Final
Citation 1, item 4
29 CFR 1910.212(b) · Machine guarding
Serious$900$675Mar 15, 2021Final
Citation 1, item 5a
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$900$675Mar 15, 2021Final
Citation 1, item 5b
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$0$0Mar 15, 2021Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Mar 15, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.215 · Grinders and abrasive wheels

Other sheet metal work manufacturing employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.