Tube Methods, Inc.: OSHA inspections and violations
Bridgeport, Pennsylvania · Iron and Steel Pipe and Tube Manufacturing from Purchased Steel · NAICS 331210
12inspections
38citation items
$18,078current penalties
Dec 20, 2017last inspection
OSHA has inspected Tube Methods, Inc. 12 times in Pennsylvania since 1973.
The latest one began on Dec 20, 2017 as a planned inspection, in Bridgeport.
Those inspections ended with 38 citation items: 23 serious and 15 other-than-serious.
Penalties were first proposed at $28,625 and now stand at $18,078, 37% lower after settlements or reviews.
Noise comes up most often in these citations: 7 items under 1910.95.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Tube Methods, Inc. averages $3,982 (2 cited inspections).
Tube Methods, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
297employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Incident on Jan 3, 2017: Employee's finger is smashed in machine, is later amputated.
On January 3, 2017, Employee #1 was operating a draw bench machine drawing tubing. While the machine was in retracting motion, the carriage of the draw bench made contact with Employee #1's finger, smashing it. Employee #1 was hospitalized and his finger was surgically amputated.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Bridgeport site logged 9 recordable injuries or illnesses among about 154 workers: 5.8 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Tube Methods, Inc.
Bridgeport · 2025
154
9
0
5.8
3.6
Included with any plan: 8 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Mar 9, 2018, Bridgeport: Hospitalization · avulsions, enucleations · hand(s) and finger(s)
An employee was performing a plug draw operation on a tube when his finger became stuck between the tube and a wood fixture, removing skin from his hand and finger.
An employee's left index finger was pinched by a plow on a draw bench, requiring medical amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
29 CFR 1904.41(a)(2)
(2) Annual electronic submission of information from OSHA Form 300 Log of Work-Related Injuries and Illnesses and OSHA Form 301 Injury and Illness Incident Report by establishments with 100 or more employees in designated industries. If your establishment had 100 or more employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix B to subpart E of this part, then you must electronically submit information from OSHA Forms 300 and 301 to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the forms.
(6) Sources of ignition—(i) General. Adequate precautions shall be taken to prevent the ignition of flammable vapors. Sources of ignition include but are not limited to open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.