OSHA SearchOSHA records by employer

Twitchell Technical Products, LLC: OSHA inspections and violations

Dothan, Alabama · Broadwoven Fabric Mills · NAICS 313210

5inspections
11citation items
$53,598current penalties
Nov 20, 2025last inspection

Since 2015, OSHA inspectors have visited Twitchell Technical Products, LLC in Alabama 5 times.

The most recent inspection opened on Nov 20, 2025 on a referral, in Dothan.

In all, OSHA issued 11 citation items: 5 serious, 2 repeat and 4 other-than-serious.

The proposed penalties came to $80,594; today they stand at $53,598, 33% less.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,874 penalty. Twitchell Technical Products, LLC averages $13,399 across 4 cited inspections.

Twitchell Technical Products, LLC also files yearly injury logs with OSHA, summarized below.

It reported 5 severe injuries to OSHA since 2015.

Twitchell Technical Products, LLC: OSHA citation items per year, 2015 to 2025
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

100employers cited

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch Twitchell Technical Products, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348604729 OPENED NOV 20, 2025Closed

Referral · Complete · Safety · 170 employees at the site · Closed Mar 31, 2026

4031 Ross Clark Circle, Dothan, AL 36303 · Broadwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.219(c)(4)(ii) · Belts, pulleys and power-transmission parts
Serious$8,513$8,513Feb 23, 2026Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Feb 23, 2026Final
Citation 2, item 2
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Other-than-serious$0$0Feb 23, 2026Final

Inspection 348137639 OPENED MAR 25, 2025Closed

Complaint · Partial · Health · 215 employees at the site · Closed Sep 5, 2025

4031 Ross Clark Circle, Dothan, AL 36303 · Broadwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1904.41(a)(1)(i) · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA
Other-than-serious$1,808$1,085Aug 12, 2025Final
Citation 1, item 2
29 CFR 1910.303(c)(3)(i) · Electrical equipment, general requirements
Other-than-serious$0$0Aug 12, 2025Final

Inspection 343716049 OPENED JAN 15, 2019Closed

Referral · Partial · Safety · 307 employees at the site · Closed Jun 21, 2019

4031 Ross Clark Cir, Dothan, AL 36303 · Broadwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Incident on Jan 10, 2019: Employee amputates finger when caught by pelletizer blade wh

At 6:30 p.m. on January 10, 2019, an employee was manually rolling the feed roller to clear a jam that was inside the pelletizer and amputated his right hand's ring finger at the first joint when struck by the cutting blades. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(d)(2) · Lockout/tagout
Serious$13,260$9,000Mar 12, 2019Final
Citation 1, item 1b
29 CFR 1910.147(d)(3) · Lockout/tagout
Serious$0$0Mar 12, 2019Final

Inspection 343335840 OPENED JUL 25, 2018Closed

Referral · Partial · Health · 328 employees at the site · Closed Oct 3, 2018

4031 Ross Clark Circle, Dothan, AL 36303 · Broadwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Incident on Jul 18, 2018: Employee faints due to ambient temperature and is rendered u

At 10:15 a.m. on July 18, 2018, an employee was performing a quality check on Loom Machine #6 when she felt light headed, called out to coworkers, and lost consciousness. The employee was overcome by the ambient temperature and was hospitalized.

No citations from this inspection.

Inspection 340570522 OPENED APR 20, 2015Closed

Referral · Complete · Safety · 306 employees at the site · Closed Oct 16, 2015

4031 Ross Clark Cir, Dothan, AL 36303 · Broadwoven Fabric Mills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(2) · General requirements
Serious$3,400$2,000Jul 31, 2015Final
Citation 1, item 2
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Serious$3,613$2,000Jul 31, 2015Final
Citation 2, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Repeat$35,000$24,000Jul 31, 2015Final
Citation 2, item 2
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Repeat$15,000$7,000Jul 31, 2015Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Dothan site logged 3 recordable injuries or illnesses among about 205 workers: 1.6 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 44 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Twitchell Technical Products
Dothan · 2025
205 311.62.6

Included with any plan: 2 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.

Nov 17, 2025, Dothan: Hospitalization, amputation · amputations involving bone loss · other finger(s) n.e.c.

An employee was clearing selvedge take-up from a loom. String wrapped around his left index finger and pulled it into the selvedge wheel. The finger was amputated.

Feb 9, 2024, Dothan: Hospitalization · cuts, lacerations, punctures without injury to internal structures · forearm(s)

An employee was using a utility knife to remove film from a roll of material for a coder machine when the knife became stuck. He pulled his arm back to free the knife. When the knife came free, it cut his left arm between the wrist and elbow.

Jan 10, 2019, Dothan: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was attempting to unjam a pelletizer pull roller when the machine's fly knife blade drum amputated his right ring finger. The machine was unguarded and running at the time of the incident.

Jul 18, 2018, Dothan: Hospitalization · effects of heat and light, n.e.c. · body systems

An employee was performing a quality control check on a loom and became lightheaded and lethargic. The ambient temperature was high and the employee was hospitalized for dehydration.

Apr 26, 2015, Dothan: Hospitalization · fractures · hip(s)

An employee was standing next to a pallet containing a box of yarn. The employee fell after twisting while unloading the box and broke his hip, requiring hospitalization.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.41 · Electronic submission of Employer Identification Number (EIN) and injury and illness records to OSHA

29 CFR 1904.41(a)(1)(i)

(a) Basic requirements—(1) Annual electronic submission of information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses. (i) If your establishment had 20-249 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.22 · General requirements

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.303 · Electrical equipment, general requirements

Other broadwoven fabric mills employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.