Since 2024, OSHA inspectors have visited Two Rivers Lumber Co., LLC in Alabama 4 times.
The most recent inspection opened on Feb 10, 2026 on a referral, in Demopolis.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $44,159; today they stand at $40,435, 8% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Two Rivers Lumber Co., LLC averages $10,109 across 4 cited inspections.
Two Rivers Lumber Co., LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
99employers cited
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Two Rivers Lumber Co., LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Demopolis site logged 11 recordable injuries or illnesses among about 162 workers: 58.4 per 100 full-time workers, against a median of 4.5 for its industry. Those cases cost 181 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Two Rivers Lumber Co.
Demopolis · 2025
162
11
2
58.4
4.5
Two Rivers Lumber Co
Demopolis · 2024
195
6
1
2.6
4.5
Two Rivers Lumber Company
Demopolis · 2022
142
3
0
1.7
4.5
Included with any plan: 5 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
May 28, 2025, Demopolis: Amputation · amputations involving bone loss · other finger(s) n.e.c.
On May 28, 2025, an employee was working at the planer area of the mill. He turned off the planer machine and went to remove a piece of wood. The machine turned on and amputated the middle and ring fingers on his right hand. The machine was not locked out/tagged out at the time.
Mar 20, 2025, Demopolis: Amputation · amputations involving bone loss · elbow(s)
On March 20, 2025, an employee was conducting preventative maintenance and visual inspection of the chains in the bark hog waste chain area. They became caught between the bark incline chain and the sprocket while clearing a stick, resulting in amputation of their right forearm at the elbow. The machine was energized at the time.
Aug 21, 2024, Demopolis: Hospitalization, amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
A crew was using pry bars to reposition a log that was stuck at an angle in the feed roller when the rollers came down on the injured employee's right hand, catching it against the log. The employee was hospitalized with an amputation of the index fingertip.
A maintenance employee was rotating a belt on the canter machine by hand to check the alignment on the belt after a new canter head and arbor shaft were installed. His left thumb was caught between the belt and the sheave resulting in an avulsion and partial amputation to the left thumb.
An employee was fixing a crossup at the sorter incline chain. The employee was attempting to get on the grating under the incline chain when his foot slipped and he fell in-between the guardrail and the grating. He fell 14 feet to the floor, hitting an airline on the way down. The employee was hospitalized with a fractured skull and possible fractured vertebrae.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.