OSHA SearchOSHA records by employer

Ufp Moultrie, LLC: OSHA inspections and violations

Moultrie, Georgia · Cut Stock, Resawing Lumber, and Planing · NAICS 321912

3inspections
2citation items
$24,079current penalties
Jul 30, 2020last inspection

Since 2018, OSHA inspectors have visited Ufp Moultrie, LLC in Georgia 3 times.

The most recent inspection opened on Jul 30, 2020 on a referral, in Moultrie.

In all, OSHA issued 2 citation items: 1 serious and 1 other-than-serious.

The penalties, $24,079 in total, stand where OSHA first set them.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Ufp Moultrie, LLC averages $12,040 across 2 cited inspections.

Ufp Moultrie, LLC also files yearly injury logs with OSHA, summarized below.

It reported 4 severe injuries to OSHA since 2015.

Ufp Moultrie, LLC: OSHA citation items per year, 2018 to 2020
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

148employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Ufp Moultrie, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344862339 OPENED JUL 30, 2020Closed

Referral · Partial · Safety · 175 employees at the site · Closed Jun 28, 2022

560 Industrial Drive, Moultrie, GA 31776 · Cut Stock, Resawing Lumber, and Planing · OSHA's record · Phone and website on Google Maps

Incident on Jul 24, 2020: Employee lacerates three fingers when feeding wood board int

At 4:43 p.m. on July 24, 2020, an employee had been setting up a Mitek component saw when he turned it on to conduct a pre-shift inspection. With the saw blades running, the employee fed a 2 inch by 8 inch by 8 foot wooden board into the saw until the board reached the hold down chains so he could adjust the chains for additional 8-foot boards. The employee attempted to use the emergency stop pull cord to stop the infeed chains once the wood reached the hold down chains in order to make the adjustment. When the employee pulled the cord with his left hand while holding the board with his right hand, the saw did not stop and the employee's right hand struck the moving blade located behind the plastic flap on the right side of the infeed chains. The employee was not adequately trained on operation of the saw, the blade was not adequately guarded, and alternative measures for the control of potentially hazardous energy were not developed for adjusting the hold down chains. The employee lacerated the first three digits of his hand, requiring hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 2
OSH Act Section 5(a)(1) · General Duty Clause
Serious$12,145$12,145Dec 30, 2020Final

Inspection 344221247 OPENED AUG 6, 2019Closed

Referral · Partial · Safety · 165 employees at the site · Closed Feb 5, 2020

560 Industrial Drive, Moultrie, GA 31776 · Cut Stock, Resawing Lumber, and Planing · OSHA's record · Phone and website on Google Maps

Incident on Jul 30, 2019: Employee amputates hand when caught in mould planer rollers

At 10:00 a.m. on July 30, 2019, an employee who worked as a machine operator for a lumber products company was making adjustments on a machine. The employee placed his left hand near the roller feed on a mould planer when his hand was caught in the machine. The employee amputated his hand, requiring hospitalization.

No citations from this inspection.

Inspection 343547212 OPENED OCT 17, 2018Closed

Referral · Partial · Safety · 180 employees at the site · Closed Sep 24, 2020

560 Industrial Drive, Moultrie, GA 31776 · Cut Stock, Resawing Lumber, and Planing · OSHA's record · Phone and website on Google Maps

Incident on Oct 8, 2018: Employee partially amputates two fingers and lacerates other

At 11:00 a.m. on October 8, 2018, an employee removed the guard from one of the blade heads on the Molder Planer Machine and was making an adjustment. The employee struck his right hand against the blade head and partially amputated his thumb and index finger while lacerating his ring finger and pinky as well. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 2
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Other-than-serious$11,934$11,934Mar 22, 2019Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2020, the Moultrie site logged 10 recordable injuries or illnesses among about 172 workers: 5.5 per 100 full-time workers, against a median of 4.2 for its industry. Those cases cost 7 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
UFP Moultrie - LLC
Moultrie · 2020
172 1025.54.2
UFP Moultrie, LLC
Moultrie · 2018
173 512.74.2

Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.

Jul 24, 2020, Moultrie: Hospitalization · cuts, lacerations · finger(s), fingernail(s), unspecified

While an employee was loading a board onto a chain, a saw blade lacerated his index, middle, and ring fingers.

Mar 18, 2020, Moultrie: Amputation · amputations · fingertip(s)

An employee was being trained to operate a saw machine. The employee was guiding pieces of wood from the chain deck conveyor into the saw. The employee's fingertip got caught between the wood being pushed and the chain conveyor's guard. When the employee felt his fingertip get pinched he pulled his hand out. His left pinky fingertip was fractured and a portion of the fingertip was pulled off.

Jul 30, 2019, Moultrie: Amputation · amputations · hand(s), unspecified

After clearing a jammed board, an employee was making a final adjustment on the molder/planer machine. Material was fed into the machine, causing the employee's hand to get pushed into the machine. The employee's left hand contacted the machine's cutting head and was amputated.

Oct 8, 2018, Moultrie: Hospitalization, amputation · amputations · finger(s), fingernail(s), unspecified

An employee was showing a coworker the adjustment needed on one of the blade heads on a planer machine. The blade head lacerated the employee's right thumb, index, ring, and little fingers and partially amputated the thumb and index finger. The employee was hospitalized. The blade head was unguarded at the time of the incident.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

OSH Act Section 5 · General Duty Clause

OSH Act Section 5(a)(1)

Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.

Other cut stock, resawing lumber, and planing employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.