OSHA has inspected Ufp Saginaw, LLC 2 times in Texas since 2017.
The latest one began on May 3, 2022 on a referral, in Saginaw.
Those inspections ended with 2 citation items: 2 serious.
Penalties were first proposed at $27,177 and now stand at $20,502, 25% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,423, and Ufp Saginaw, LLC averages $10,251 (2 cited inspections).
Ufp Saginaw, LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Mar 15, 2017: Employee amputates finger tip while cutting wood with router
At 2:00 p.m. on March 15, 2017, an employee was using a mounted under-the-table top router to cut pieces of wood and caught the tip of her finger with the router bit. The employee amputated the tip of her finger and was hospitalized. was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Saginaw site logged 4 recordable injuries or illnesses among about 210 workers: 1.5 per 100 full-time workers, against a median of 4.2 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
UFP Saginaw LLC
Saginaw · 2025
210
4
2
1.5
4.2
UFP Saginaw, LLC
Saginaw · 2022
267
6
4
1.6
4.2
UFP Saginaw
Saginaw · 2022
70
5
2
6.8
3.6
UFP Saginaw, LLC.
Saginaw · 2021
229
13
6
3.3
4.2
UFP North Texas Transportation
Saginaw · 2018
40
2
2
4.1
3.6
Included with any plan: 9 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was attempting to close a cylinder by lifting a push bar switch that was stuck. The employee strained their abdomen, resulting in a hernia.
Jun 8, 2022, Saginaw: Hospitalization · cuts, lacerations · wrist(s)
A temporary employee was using a powered hand grinder to cut a piece of ultra-high molecular weight polyethylene plastic. The hand tool contacted the employee's left wrist, resulting in a laceration.
An employee was offloading material from a panel saw. He was retrieving material when the saw amputated his right index, middle, ring, and little fingers above the middle knuckle.
An employee was operating equipment that produced wooden stakes. Lumber became jammed, and as the employee tried to free it, his left little finger was caught between the end of a piece of lumber and the side of a conveyor belt. The finger was pinched and required partial medical amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Each employer shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.
Other lumber, plywood, millwork, and wood panel merchant wholesalers employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.