Ufp San Antonio, LLC: OSHA inspections and violations
San Antonio, Texas · Cut Stock, Resawing Lumber, and Planing · NAICS 321912
2inspections
3citation items
$6,200current penalties
Nov 5, 2019last inspection
OSHA has inspected Ufp San Antonio, LLC 2 times in Texas since 2016.
The latest one began on Nov 5, 2019 as a planned inspection, in San Antonio.
Those inspections ended with 3 citation items: 2 serious and 1 other-than-serious.
Penalties were first proposed at $10,705 and now stand at $6,200, 42% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Ufp San Antonio, LLC averages $3,100 (2 cited inspections).
Ufp San Antonio, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the San Antonio site logged 5 recordable injuries or illnesses among about 170 workers: 2.4 per 100 full-time workers, against a median of 3.9 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
UFP San Antonio LLC
San Antonio · 2023
170
5
0
2.4
3.9
UFP San Antonio,LLC
San Antonio · 2019
130
7
3
2.5
3.9
UFP San Antonio, LLC
San Antonio · 2016
169
5
1
2.2
3.9
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was moving flippers for the lumber to go up to the rack. The employee's gloved hand was caught in a 12-foot long shaft, resulting in a left thumb amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(c)(2)(i)
(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.
(b) Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.
(a) During the course of construction, alteration, or repairs, form and scrap lumber with protruding nails, and all other debris, shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures.
Other cut stock, resawing lumber, and planing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.