OSHA SearchOSHA records by employer

Usg Interiors LLC.: OSHA inspections and violations

Medina, Ohio · Ornamental and Architectural Metal Work Manufacturing · NAICS 332323

2inspections
4citation items
$9,078current penalties
Apr 6, 2021last inspection

Usg Interiors LLC. has 2 OSHA inspections on record in Ohio, the first in 1989.

OSHA's last visit started on Apr 6, 2021 on a referral, in Westlake.

Across those inspections OSHA issued 4 citation items: 4 serious.

OSHA proposed $9,378 in penalties. After settlements and reviews the total is $9,078, down 3%.

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Usg Interiors LLC. averages $8,778 over 1 cited inspection in that time.

It reported 1 severe injury to OSHA since 2015.

Usg Interiors LLC.: OSHA citation items per year, 1989 to 2021
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

267employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Usg Interiors LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345235998 OPENED APR 6, 2021Closed

Referral · Partial · Safety · 169 employees at the site · Closed Jul 19, 2021

1000 Crocker Road, Westlake, OH 44145 · Ornamental and Architectural Metal Work Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.179(n)(3)(i) · Overhead and gantry cranes
Serious$8,778$8,778Jun 21, 2021Final

Inspection 105932875 OPENED JUN 23, 1989Closed

Complaint · Partial · Health · 65 employees at the site · Closed Dec 31, 1990

1035 W. Smith Road, Medina, OH 44256 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.110(e)(4)(iii) · Storage and handling of liquefied petroleum gases
Serious$180$100Jul 25, 1989Closed
Citation 1, item 2
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$120$100Jul 25, 1989Closed
Citation 1, item 3
29 CFR 1910.305(b)(1) · Electrical wiring methods
Serious$300$100Jul 25, 1989Closed

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 2, 2021, Westlake: Hospitalization · crushing injuries · leg(s), unspecified

An employee was setting a metal strip coil in a mill utilizing one of the racks. As the employee was pulling out the crane, the hook caught the last coil and pulled it out of the rack. When the coil tipped backward off the rack, it fell, pinning his right leg to the ground and crushing it.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.110 · Storage and handling of liquefied petroleum gases

29 CFR 1910.110(e)(4)(iii)

(iii) Permanent and removable fuel containers shall be securely mounted to prevent jarring loose, slipping, or rotating, and the fastenings shall be designed and constructed to withstand static loading in any direction equal to twice the weight of the tank and attachments when filled with fuel using a safety factor of not less than four based on the ultimate strength of the material to be used. Field welding, when necessary, shall be made only on saddle plates, lugs or brackets, originally attached to the container by the tank manufacturer.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(n)(3)(i)

(3) Moving the load. (i) The load shall be well secured and properly balanced in the sling or lifting device before it is lifted more than a few inches.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.305 · Electrical wiring methods

Other ornamental and architectural metal work manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.