Findlay, Ohio · Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing · NAICS 326113
3inspections
4citation items
$35,033current penalties
Jan 29, 2020last inspection
Valfilm, LLC has 3 OSHA inspections on record in Ohio, the first in 2018.
OSHA's last visit started on Jan 29, 2020 after a complaint, in Findlay.
Across those inspections OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
OSHA proposed $46,249 in penalties. After settlements and reviews the total is $35,033, down 24%.
Most often, OSHA cited 1910.212, machine guarding (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Valfilm, LLC averages $11,678 over 3 cited inspections in that time.
1 inspection on this page followed a fatal incident.
Valfilm, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
273employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Jan 22, 2020: Employee crushes arm when pulled into winding machine
At 6:30 p.m. on January 22, 2020, an employee was operating a plastic film winding machine and had removed a roll from the outer mandrel and was beginning to starting a new roll of plastic film on the inner mandrel. There was double-sided tape on the new core, however it did not catch the thicker plastic film so that the film did not start winding onto the new core as it should have. Coworker #1 (Supervisor) assisted the employee's attempts to get the roll started by using scissors to stab the plastic into the cardboard core. Coworker #1's attempt failed and so the employee attempted the same method, however the scissors got stuck and were pulled into the machine pulling her arm into the mandrel and the lay-on roll as a result. Coworker #2 was nearby and activated an e-stop. The winder was equipped with safety mats; however they did not prevent the employees from reaching the hazard area. The employee crushed her right arm and was hospitalized to treat fractures to her upper and lower arm.
Incident on Jun 5, 2018 (fatal): Employee is crushed between semi-truck and loading dock and
At approximately 2:45 p.m. on June 5, 2018, an employee was performing maintenance activities on the dock lock on Dock B41. The employee was sitting or kneeling facing the dock performing the work when a semi trailer driver backed into the dock, crushing him between the dock and trailer, causing fatal injuries. The area around the dock was not blocked off in any way to prevent access to the dock.
Incident on Mar 7, 2018: Employee's fingers are amputated in a guillotine
At 1:40 p.m. on March 7, 2018, a 26-year-old male employee was working for a firm that manufactured unlaminated plastics film and sheet (except packaging). He was operating a REI-ZR guillotine located in the facility's Stretch Production Department. He was placing a roll with film into the REI-ZR guillotine's point of operation. He climbed onto a table, located on the back side of the guillotine, to load the roll with the film into the guillotine's point of operation, by rolling it under the blade. The roll weighed approximately 90 to 180 kilograms (200 to 400 pounds). When the employee rolled the roll toward the blade, he stopped the roll under the blade with his left hand. This way, the roll would not hit his coworker, who was standing on the opposite side. At that time, the employee had his left hand stuck between the roll with plastic and the blade of the guillotine. He asked a coworker (the narrative did not note whether this was a second coworker or not) to move the blade up. That could be done by pressing two buttons on the control panel located on the right side of the guillotine. This coworker pressed the wrong button, and the blade moved down. As a result, the employee sustained the partial amputation of the index, middle, and ring fingers on his left hand. He was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Findlay site logged 7 recordable injuries or illnesses among about 169 workers: 4.5 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 180 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Valfilm Findlay
Findlay · 2020
169
7
1
4.5
2.6
Included with any plan: 4 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was teaching a new employee how to operate a guillotine when the alignment of a product roll inside the guillotine needed to be fixed. The employee was attempting to grab the roll when the controls were activated. The guillotine then came down on the employee s left hand, amputating the pinky, ring, middle, and index fingers. The guillotine was guarded at the time of the incident.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(f) Hepatitis B vaccination and post-exposure evaluation and follow-up—(1) General. (i) The employer shall make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure, and post-exposure evaluation and follow-up to all employees who have had an exposure incident.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.212(a)(3)(iii)
(iii) Special handtools for placing and removing material shall be such as to permit easy handling of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only be used to supplement protection provided.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.