OSHA SearchOSHA records by employer

Varmon Drywall LLC.: OSHA inspections and violations

Houston, Texas · Sawmill, Woodworking, and Paper Machinery Manufacturing · NAICS 333243

1inspections
5citation items
$7,800current penalties
Apr 22, 2021last inspection

OSHA has inspected Varmon Drywall LLC. once in Texas.

The inspection began on Apr 22, 2021 after a complaint, in Houston.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $13,038 and now stand at $7,800, 40% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Varmon Drywall LLC. averages $7,800 (1 cited inspection).

The Wage and Hour Division has 1 case on it since 2015, with $336,781 in back wages owed to workers.

Varmon Drywall LLC.: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Varmon Drywall LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345267009 OPENED APR 22, 2021Closed

Complaint · Partial · Safety · 75 employees at the site · Closed Jun 17, 2022

10620 Rockley Road, Houston, TX 77099 · Sawmill, Woodworking, and Paper Machinery Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.107(g)(2) · Spray painting and finishing
Serious$4,096$2,457Jul 20, 2021Final
Citation 1, item 2a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$5,461$3,277Jul 20, 2021Final
Citation 1, item 2b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Jul 20, 2021Final
Citation 1, item 2c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Jul 20, 2021Final
Citation 1, item 3
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
Serious$3,481$2,066Jul 20, 2021Final

Wage and hour cases

Cases by the Labor Department's Wage and Hour Division since 2015: unpaid minimum wage or overtime, child labor, family leave and more.

Period reviewedViolationsWorkers owedBack wagesPenalties
Jan 18, 2018 to Jan 17, 2020
Houston
152151$336,781$0

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.107 · Spray painting and finishing

29 CFR 1910.107(g)(2)

(2) Cleaning. All spraying areas shall be kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary. Scrapers, spuds, or other such tools used for cleaning purposes shall be of nonsparking material.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.303 · Electrical equipment, general requirements

Other sawmill, woodworking, and paper machinery manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.