Dover, New Hampshire · Wood Container and Pallet Manufacturing · NAICS 321920
5inspections
8citation items
$18,650current penalties
Jun 23, 2017last inspection
OSHA has inspected Vigilant Inc. 5 times in New Hampshire since 2007.
The latest one began on Jun 23, 2017 on a referral, in Dover.
Those inspections ended with 8 citation items: 5 serious, 2 repeat and 1 other-than-serious.
Penalties were first proposed at $28,830 and now stand at $18,650, 35% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 6 items under 1910.213.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Vigilant Inc. averages $10,150 (1 cited inspection).
Vigilant Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New Hampshire · latest 90 days of OSHA records
52employers cited
Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.
Incident on Jun 21, 2017: Employee's hand contacts saw blade, amputating three fingers
At 10:00 a.m. on June 21, 2017, an employee was operating a Tiger saw in a shop area. During work, the employee's right hand became caught in the saw blade and amputated three of his fingers.
No citations from this inspection.
Inspection 340591239 OPENED APR 28, 2015Closed
Referral · Partial · Safety · 30 employees at the site · Closed Aug 29, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Dover site logged 5 recordable injuries or illnesses among about 47 workers: 106.4 per 100 full-time workers, against a median of 3.7 for its industry. Those cases cost 22 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Vigilant, Inc.
Dover · 2024
47
5
2
106.4
3.7
Included with any plan: 3 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(3)
(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.
Other wood container and pallet manufacturing employers in New Hampshire
Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.