OSHA SearchOSHA records by employer

Wall Township: OSHA inspections and violations

Wall Township, New Jersey · Facilities Support Services · NAICS 561210

2inspections
13citation items
$53,200current penalties
May 14, 2015last inspection

Since 2015, OSHA inspectors have visited Wall Township in New Jersey 2 times.

The most recent inspection opened on May 14, 2015 to follow up on an earlier case, in Wall Township.

In all, OSHA issued 13 citation items: 10 serious and 3 other-than-serious.

The penalties, $53,200 in total, stand where OSHA first set them.

The rule cited most here is 1910.304 (grounding and circuit protection), 2 times.

Among staffing, cleaning and waste services employers, the typical cited inspection since 2015 ends with a $2,201 penalty. Wall Township averages $53,200 across 1 cited inspection.

Wall Township: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Wall Township again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 340640614 OPENED MAY 14, 2015Closed

Follow-up · Partial · Safety · Local government · 61 employees at the site · Closed May 14, 2015

2700 Allaire Road, Wall Township, NJ 07719 · Facilities Support Services · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 340435841 OPENED FEB 26, 2015Closed

Planned · Complete · Safety · Local government · 61 employees at the site · Closed May 14, 2015

2301 Tiltons Corner Road, Wall Township, NJ 07719 · Facilities Support Services · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(2) · General requirements
Serious$6,300$6,300Mar 11, 2015Final
Citation 1, item 2
29 CFR 1910.22(b)(1) · General requirements
Serious$5,400$5,400Mar 11, 2015Final
Citation 1, item 3
29 CFR 1910.26(c)(2)(vii) · Portable metal ladders
Serious$3,600$3,600Mar 11, 2015Final
Citation 1, item 4
29 CFR 1910.107(b)(9) · Spray painting and finishing
Serious$3,600$3,600Mar 11, 2015Final
Citation 1, item 5
29 CFR 1910.146(d)(14) · Permit-required confined spaces
Other-than-serious$400$400Mar 11, 2015Final
Citation 1, item 6
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Other-than-serious$400$400Mar 11, 2015Final
Citation 1, item 7
29 CFR 1910.244(a)(1)(ii) · Other portable tools and equipment
Serious$3,600$3,600Mar 11, 2015Final
Citation 1, item 8
29 CFR 1910.303(b)(1) · Electrical equipment, general requirements
Serious$6,300$6,300Mar 11, 2015Final
Citation 1, item 9
29 CFR 1910.304(f)(1)(iv) · Grounding and circuit protection
Serious$3,600$3,600Mar 11, 2015Final
Citation 1, item 10
29 CFR 1910.304(g)(5) · Grounding and circuit protection
Serious$6,300$6,300Mar 11, 2015Final
Citation 1, item 11
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Serious$6,300$6,300Mar 11, 2015Final
Citation 1, item 12
29 CFR N.J.S.A. 34:6A-33(A)
Serious$7,000$7,000Mar 11, 2015Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$400$400Mar 11, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.107 · Spray painting and finishing

29 CFR 1910.107(b)(9)

(9) Cleaning. Spray booths shall be so installed that all portions are readily accessible for cleaning. A clear space of not less than 3 feet on all sides shall be kept free from storage or combustible construction.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.146 · Permit-required confined spaces

29 CFR 1910.146(d)(14)

(14) Review the permit space program, using the canceled permits retained under paragraph (e)(6) of this section within 1 year after each entry and revise the program as necessary, to ensure that employees participating in entry operations are protected from permit space hazards.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.22 · General requirements

29 CFR 1910.244 · Other portable tools and equipment

29 CFR 1910.26 · Portable metal ladders

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.304 · Grounding and circuit protection

29 CFR 1910.305 · Electrical wiring methods

Other facilities support services employers in New Jersey

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.