OSHA SearchOSHA records by employer

Warrior Manufacturing, LLC: OSHA inspections and violations

Hope, North Dakota · Farm Machinery and Equipment Manufacturing · NAICS 333111

1inspections
8citation items
$4,546current penalties
May 21, 2019last inspection

Warrior Manufacturing, LLC has one OSHA inspection on record in North Dakota.

OSHA opened it on May 21, 2019 after a complaint, in Hope.

From that inspection OSHA issued 8 citation items: 3 serious and 5 other-than-serious.

OSHA proposed $9,093 in penalties. After settlements and reviews the total is $4,546, down 50%.

Most often, OSHA cited 1910.107, spray painting and finishing (4 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Warrior Manufacturing, LLC averages $4,546 over 1 cited inspection in that time.

Warrior Manufacturing, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

North Dakota · latest 90 days of OSHA records

30employers cited

Get notified the morning OSHA posts each new citation in North Dakota: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Dakota

Checking a subcontractor, a client or your own company? Watch Warrior Manufacturing, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Warrior Manufacturing, LLC at 4 sites in 3 states. Together they've had 11 inspections and $38,822 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 4 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 344037148 OPENED MAY 21, 2019Closed

Complaint · Partial · Health · 15 employees at the site · Closed Aug 6, 2020

12 Ingalls Avenue, Hope, ND 58046 · Farm Machinery and Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.36(e)(2) · Exit route design
Serious$3,789$1,894Nov 19, 2019Final
Citation 1, item 1b
29 CFR 1910.107(e)(2) · Spray painting and finishing
Serious$0$0Nov 19, 2019Final
Citation 1, item 2
29 CFR 1910.107(d)(2) · Spray painting and finishing
Serious$5,304$2,652Nov 19, 2019Final
Citation 2, item 1
29 CFR 1910.107(c)(2) · Spray painting and finishing
Other-than-serious$0$0Nov 19, 2019Final
Citation 2, item 2
29 CFR 1910.107(g)(7) · Spray painting and finishing
Other-than-serious$0$0Nov 19, 2019Final
Citation 2, item 3
29 CFR 1910.132(d)(1) · Personal protective equipment, general requirements
Other-than-serious$0$0Nov 19, 2019Final
Citation 2, item 4
29 CFR 1910.133(a)(1) · Eye and face protection
Other-than-serious$0$0Nov 19, 2019Final
Citation 2, item 5
29 CFR 1910.1000(e) · Air contaminants
Other-than-serious$0$0Nov 19, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1000 · Air contaminants

29 CFR 1910.1000(e)

(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.

29 CFR 1910.107 · Spray painting and finishing

29 CFR 1910.107(c)(2)

(2) Minimum separation. There shall be no open flame or spark producing equipment in any spraying area nor within 20 feet thereof, unless separated by a partition.

29 CFR 1910.107(d)(2)

(2) General. All spraying areas shall be provided with mechanical ventilation adequate to remove flammable vapors, mists, or powders to a safe location and to confine and control combustible residues so that life is not endangered. Mechanical ventilation shall be kept in operation at all times while spraying operations are being conducted and for a sufficient time thereafter to allow vapors from drying coated articles and drying finishing material residue to be exhausted.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.133 · Eye and face protection

29 CFR 1910.36 · Exit route design

Other farm machinery and equipment manufacturing employers in North Dakota

Alert subscribers get notified of each newly cited employer in North Dakota the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.