OSHA SearchOSHA records by employer

Whitten Construction, LLC: OSHA inspections and violations

Jumping Branch, West Virginia · Site Preparation Contractors · NAICS 238910

1inspections
3citation items
$2,523current penalties
May 1, 2019last inspection

OSHA has inspected Whitten Construction, LLC once in West Virginia.

The inspection began on May 1, 2019 after a fatality or catastrophe, in Jumping Branch.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $4,205 and now stand at $2,523, 40% lower after settlements or reviews.

Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Whitten Construction, LLC averages $2,523 (1 cited inspection).

1 inspection on this page followed a fatal incident.

Whitten Construction, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

West Virginia · latest 90 days of OSHA records

29employers cited

Get notified the morning OSHA posts each new citation in West Virginia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in West Virginia

Checking a subcontractor, a client or your own company? Watch Whitten Construction, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343974515 OPENED MAY 1, 2019Closed

Fatality or catastrophe · Complete · Safety · 3 employees at the site · Closed Sep 14, 2021

Streeter Rd, Jumping Branch, WV 25969 · Site Preparation Contractors · OSHA's record · Phone and website on Google Maps

Incident on May 1, 2019 (fatal): Employee is struck by falling tree limb and is killed

At 9:45 a.m. on May 1, 2019, Employee #1 and coworkers, employed by a construction company, were felling and clearing a tree. Employee #1 and three coworkers were cutting large limbs on the ground. One coworker was operating an excavator with a bucket clamp attachment and moving large limbs that had been cut from the tree to the area where the other employees were working on the ground. For unknown reasons, Employee #1 ran underneath a limb being held by the excavator. The limb slipped out from the clamp and fell, striking Employee #1. Employee #1 was killed.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.135(a)(1) · Head protection
Serious$2,273$1,364Aug 29, 2019Final
Citation 1, item 2a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$1,932$1,159Aug 29, 2019Final
Citation 1, item 2b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Aug 29, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.135 · Head protection

29 CFR 1910.135(a)(1)

(a) General requirements. (1) The employer shall ensure that each affected employee wears a protective helmet when working in areas where there is a potential for injury to the head from falling objects.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other site preparation contractors employers in West Virginia

Alert subscribers get notified of each newly cited employer in West Virginia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.