OSHA SearchOSHA records by employer

Wood Creations: OSHA inspections and violations

Delphos, Ohio · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
2citation items
$2,610current penalties
Dec 21, 2021last inspection

OSHA has inspected Wood Creations once in Ohio.

The inspection began on Dec 21, 2021 on a referral, in Delphos.

That inspection ended with 2 citation items: 2 serious.

Penalties were first proposed at $4,351 and now stand at $2,610, 40% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 2 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Wood Creations averages $2,610 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Wood Creations: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

267employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Wood Creations and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345698674 OPENED DEC 21, 2021Closed

Referral · Partial · Safety · 5 employees at the site · Closed May 5, 2022

12805 State Road, Delphos, OH 45833 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Dec 13, 2021: Employee partially amputates fingers on sliding table saw

At 3:45 p.m. on December 13, 2021, an employee was lifting a 9-foot by 2-foot wood panel off the Altendorf WA6 sliding table saw after ripping it to size. When the employee went to lift the panel, it slipped and he attempted to catch it before it hit the blade that was still rotating. The employee's fingers contacted the top of the blade and he suffered a partial amputation to three fingers on his right hand. The employee was treated without hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$4,351$2,610Mar 28, 2022Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Mar 28, 2022Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Dec 13, 2021, Delphos: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was operating a sliding table saw to bevel the edge of a wood panel. When the employee took the panel to the saw to be cut, the panel slipped and they attempted to grab it with their hand, causing their left hand to contact the running saw blade. The employee's middle finger was amputated at the first knuckle, and their index and ring fingers were amputated at the nail bed. The saw…

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

Other wood kitchen cabinet and countertop manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.