Hamburg, New York · Sheet Metal Work Manufacturing · NAICS 332322
5inspections
22citation items
$8,195current penalties
Aug 28, 2023last inspection
Since 1976, OSHA inspectors have visited Abasco Inc in New York 5 times.
The most recent inspection opened on Aug 28, 2023 after a complaint, in Hamburg.
In all, OSHA issued 22 citation items: 7 serious and 15 other-than-serious.
The proposed penalties came to $31,836; today they stand at $8,195, 74% less.
The rule cited most here is 1910.252 (welding fire safety), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Abasco Inc averages $8,000 across 1 cited inspection.
Abasco Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
356employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Complaint · Partial · Safety · 42 employees at the site · Closed Feb 25, 2025
5225 Southwestern Boulevard, Hamburg, NY 14075 · Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers · OSHA's record · Phone and website on Google Maps
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Hamburg site logged 7 recordable injuries or illnesses among about 38 workers: 25.7 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 41 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Abasco Inc
Hamburg · 2025
38
7
1
25.7
3.6
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
29 CFR 1910.106(f)(6)
(6) Sources of ignition. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be handled, drawn, or dispensed where flammable vapors may reach a source of ignition. Smoking shall be prohibited except in designated localities. “No Smoking” signs shall be conspicuously posted where hazard from flammable liquid vapors is normally present.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.