Accutech Films, Inc.: OSHA inspections and violations
Coldwater, Ohio · Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing · NAICS 326113
6inspections
6citation items
$25,892current penalties
Aug 3, 2021last inspection
OSHA has inspected Accutech Films, Inc. 6 times in Ohio since 2007.
The latest one began on Aug 3, 2021 after a complaint, in Coldwater.
Those inspections ended with 6 citation items: 4 serious and 2 other-than-serious.
Penalties were first proposed at $43,314 and now stand at $25,892, 40% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 3 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Accutech Films, Inc. averages $12,696 (2 cited inspections).
Accutech Films, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Incident on Aug 7, 2018: Employee amputates finger while working on plastic winder
At 4:00 p.m. on August 7, 2018, employees worked to pull the shaft out from inside the core of a plastic winding machine. After some difficulty, Employee 1 used his left index finger to release air from the shaft's bladder. As Employee 1's finger was on the air valve, Employee 2 pulled the shaft, causing Employee 1''s finger to be pinched between the core and the shaft where the air valve is located. Employee 1 sustained a left index fingertip amputation.
No citations from this inspection.
Inspection 342501095 OPENED JUL 25, 2017Closed
Referral · Partial · Safety · 95 employees at the site · Closed Nov 13, 2017
Incident on Jul 20, 2017: Employee is checking a malfunction on a bagging machine and
At 3:30 a.m. on July 20, 2017, an employee was checking a malfunction on the gamma bagging machine. The employee came into contact with the moving parts on a Gamma Bag Cutting Machine after a coworker had started the machine. The employee was transported to the Coldwater Ohio Hospital and suffered a partial amputation of his right middle and index fingers. Hospitalization was not required.
Incident on Jun 6, 2007: Employee fractures arm in plastic film winder
At approximately 3:40 p.m. on May 6, 2007, an employee was tucking plastic film around the top rotating cardboard core in the production area of the facility. H is left arm was caught-in a Battenfeld Gloucester portable plastic film winder, Serial Number 40608-30, Model Number 118 winder. A coworker heard the employee s hout for help and responded to the scene to hit the e-stop button on the control panel located directly adjacent to the machinery. The employee was hospitalized and treated for a fractured arm.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Coldwater site logged 4 recordable injuries or illnesses among about 80 workers: 4.7 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 39 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Coldwater site
Coldwater · 2023
80
4
1
4.7
2.6
Included with any plan: 3 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was assisting with threading a film winder when the winder activated. The employee's right hand was pulled into a nip point resulting in degloving of the little finger and crush injuries to the index and little fingers.
Aug 7, 2018, Coldwater: Amputation · amputations · fingertip(s)
On August 7, 2018, an employee was releasing air from a winder shaft when another employee pushed the core onto the shaft while the employee's finger was still on the air release valve. The employee's left index fingertip was caught between the shaft and the core, resulting in a fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;
29 CFR 1910.147(c)(7)(iv)
(iv) The employer shall certify that employee training has been accomplished and is being kept up to date. The certification shall contain each employee's name and dates of training.
29 CFR 1910.147(d)
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.