Arcelormittal-Weirton, LLC: OSHA inspections and violations
Weirton, West Virginia · Iron and Steel Mills and Ferroalloy Manufacturing · NAICS 331111
10inspections
8citation items
$40,264current penalties
May 21, 2020last inspection
Since 2012, OSHA inspectors have visited Arcelormittal-Weirton, LLC in West Virginia 10 times.
The most recent inspection opened on May 21, 2020 after a fatality or catastrophe, in Weirton.
In all, OSHA issued 8 citation items: 6 serious and 2 other-than-serious.
The proposed penalties came to $58,763; today they stand at $40,264, 31% less.
The rule cited most here is 1910.22 (walking-working surfaces), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Arcelormittal-Weirton, LLC averages $6,523 across 5 cited inspections.
1 inspection on this page followed a fatal incident.
Arcelormittal-Weirton, LLC also files yearly injury logs with OSHA, summarized below.
It reported 10 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
West Virginia · latest 90 days of OSHA records
28employers cited
Get notified the morning OSHA posts each new citation in West Virginia: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Arcelormittal-Weirton, LLC and get notified the morning OSHA posts a new citation for it.
Incident on May 21, 2020 (fatal): Employee is crushed and killed by suspended steel coil
At 9:00 a.m. on May 21, 2020, an employee was working at a steel mill. He was operating a remotely operated overhead crane to load steel coils onto a flatbed trailer. He was retrieving the ticket on a 13,150-kilogram (29,000-lb) coil that was suspended from the crane. For unknown reasons, the crane moved. The employee was crushed between the suspended coil and a second steel coil that was located on the floor behind him. He was killed.
Incident on Jul 13, 2017: Employee sustains multiple injuries in fall
At 11:30 a.m. on July 13, 2017, Employee #1 was assisting in the backup roll change on the 9 Tandem Mill. This process required subfloor sections to be removed to access the rolls located in the nine foot pit below. Following the change out, a subfloor section was being lowered back into the pit. It made contact with a fire suppression water line, causing it to rupture. Employee #1 stepped down onto a floor support structure in order to enter the pit to fix the line. The employee slipped and fell into the pit, hitting his head on a backup rail. Employee #1 was removed from the pit by coworkers via a Stokes basket and was flown to a nearby hospital. The employee sustained fractured ribs, spine, and vertebrae, as well as head trauma. Employee #1 was hospitalized for his injuries.
Incident on Jul 16, 2017: Employee falls while performing preventative maintenance wor
At 7:30 a.m. on July 19, 2017, an employee was performing preventative maintenance on a Looper Car of Pickle Line 15. The employee stepped across the rail to check the wheels of the Looper Car on the hot mill side and onto the grating. As the employee stepped onto the grating, it collapsed and the employee fell within the grating to the bottom level where it landed on the employee. Emergency Services was contacted and the employee was transported to Weirton Medical before being transferred to UPMC Montefiore where surgery was performed to repair a broken ankle. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Weirton site logged 27 recordable injuries or illnesses among about 771 workers: 3.5 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 252 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
ArcelorMittal Weirton
Weirton · 2020
771
27
13
3.5
2.2
Arcelormittal-Weirton
Weirton · 2018
895
31
5
3.5
2.2
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 10 reports on file, the 6 most recent shown.
An employee was using a piece of I-beam to pound out a piece of scrap metal from a mandrel when his hand got caught between the I-beam and the scrap metal, leading to a cut and a smashed hand.
Jul 29, 2019, Weirton: Hospitalization · fractures · chest, except internal location of diseases or disorders
An employee was searching for scrap debris behind tailing rolls. The employee was descending a step at the tension reel area towards the coil car when his heel slipped, causing him to fall into the coil car, striking his rib cage. He sustained three broken ribs and a contusion on the side.
An employee was using a 60-foot long pole to knock a piece of steel scrap loose from the heating section of a continuous annealer after a strip break when a refractory brick came loose and fell, striking the employee's hard hat and causing a concussion. A second employee sustained a head contusion when the fragmented refractory brick bounced off the first employee's hard hat and struck him in the…
Aug 5, 2018, Weirton: Hospitalization · fractures · forearm(s)
While replacing a spray line on a continuous anneal line, an employee installed a come-along on a pipe to remove it. The pipe was rusty on the backside and broke under tension, flying back and striking the employee's arm. The employee suffered a broken left ulna.
An employee was performing preventative maintenance on a loop car while standing on grating. As he was checking the wheels of the loop car, the grating gave way and he fell through the opening to the next level below, injuring his ankle. He was hospitalized.
On 7/13/17, an employee changed out the back-up rolls at a tandem when he noticed a leak in a pipe and stepped inside the pit. His foot slipped and he fell, striking his head against the track rail that is used to move the back-up rolls. He suffered fractured ribs, fractured vertebrae, and head lacerations.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(4)(iii)
(iii) An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years.
(d) Mounting—(1) Inspection. Immediately before mounting, all wheels shall be closely inspected and sounded by the user (ring test) to make sure they have not been damaged in transit, storage, or otherwise. The spindle speed of the machine shall be checked before mounting of the wheel to be certain that it does not exceed the maximum operating speed marked on the wheel. Wheels should be tapped gently with a light nonmetallic implement, such as the handle of a screwdriver for light wheels, or a wooden mallet for heavier wheels. If they sound cracked (dead), they shall not be used. This is known as the “Ring Test”.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
Alert subscribers get notified of each newly cited employer in West Virginia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.