OSHA has inspected Bon Tool Co. 2 times in Pennsylvania since 2013.
The latest one began on Jun 8, 2018 as a planned inspection, in Gibsonia.
Those inspections ended with 5 citation items: 4 serious and 1 other-than-serious.
Penalties were first proposed at $9,054 and now stand at $5,885, 35% lower after settlements or reviews.
Spray painting and finishing comes up most often in these citations: 4 items under 1910.107.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Bon Tool Co. averages $5,885 (1 cited inspection).
Bon Tool Co. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
300employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Gibsonia site logged 1 recordable injury or illness among about 64 workers: 2.2 per 100 full-time workers, against a median of 3.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Bon Tool Co
Gibsonia · 2024
64
1
0
2.2
3.2
Bon Tool Headquarters Office
Gibsonia · 2021
32
0
0
0.0
3.2
Bon Tool Warehouse
Gibsonia · 2021
18
0
0
0.0
3.2
Bon Tool Manufacturing
Gibsonia · 2021
17
2
2
13.6
3.2
Included with any plan: 11 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(10) Illumination. When spraying areas are illuminated through glass panels or other transparent materials, only fixed lighting units shall be used as a source of illumination. Panels shall effectively isolate the spraying area from the area in which the lighting unit is located, and shall be of a noncombustible material of such a nature or so protected that breakage will be unlikely. Panels shall be so arranged that normal accumulations of residue on the exposed surface of the panel will not be raised to a dangerous temperature by radiation or conduction from the source of illumination.
29 CFR 1910.107(b)(5)(i)
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(b)(5)(iv)
(iv) Space within the spray booth on the downstream and upstream sides of filters shall be protected with approved automatic sprinklers.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.