OSHA SearchOSHA records by employer

Cabinet Components I LLC: OSHA inspections and violations

Bessemer, Alabama · Hardware Manufacturing · NAICS 332510

2inspections
3citation items
$11,437current penalties
May 9, 2023last inspection

Since 2020, OSHA inspectors have visited Cabinet Components I LLC in Alabama 2 times.

The most recent inspection opened on May 9, 2023 on a referral, in Bessemer.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $17,901; today they stand at $11,437, 36% less.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Cabinet Components I LLC averages $5,718 across 2 cited inspections.

It reported 2 severe injuries to OSHA since 2015.

Cabinet Components I LLC: OSHA citation items per year, 2020 to 2023
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

100employers cited

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch Cabinet Components I LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346690670 OPENED MAY 9, 2023Closed

Referral · Partial · Safety · 55 employees at the site · Closed Oct 18, 2023

2501 19th Street North, Bessemer, AL 35023 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$10,938$6,563Sep 25, 2023Final
Citation 1, item 1b Serious$0$0Sep 25, 2023Final

Inspection 345039515 OPENED NOV 24, 2020Closed

Referral · Partial · Safety · 50 employees at the site · Closed Mar 30, 2021

2501 19th St N, Bessemer, AL 35023 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Nov 19, 2020: Employee amputates fingertip while cleaning planer

At 7:45 a.m. on November 19, 2020, an employee was cleaning a double-headed planer with an air hose. The employee saw a piece of wood and went to grab it, when it shot out and struck his finger. The heads were still rotating at the time. The employee suffered a distal fracture and partial traumatic amputation of the fingertip through the phalanx of the right index finger. The employee was treated without hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$6,963$4,874Feb 17, 2021Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

May 3, 2023, Bessemer: Amputation · amputations · finger(s), fingernail(s), unspecified

An employee was adjusting a molder machine when their right ring and little fingers contacted the machine blade, resulting in amputations.

Nov 19, 2020, Bessemer: Amputation · amputations · fingertip(s)

An employee had lowered the bed of a double-headed planer machine and was about to clean it. He was trying to remove a piece of wood from the machine bed when the blade of the planer kicked the wood out. It struck the employee on the right index finger, causing lacerations to the fingernail and finger, as well as a fracture and partial amputation to the fingertip.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(4)(ii)(b)

(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;

29 CFR 1910.147(c)(7)(i)(a)

(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.

Other hardware manufacturing employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.