OSHA SearchOSHA records by employer

Hager Companies: OSHA inspections and violations

Hope Hull, Alabama · Hardware Manufacturing · NAICS 332510

6inspections
8citation items
$18,225current penalties
Aug 16, 2017last inspection

Since 2003, OSHA inspectors have visited Hager Companies in Alabama 6 times.

The most recent inspection opened on Aug 16, 2017 on a referral, in Hope Hull.

In all, OSHA issued 8 citation items: 5 serious and 3 other-than-serious.

The proposed penalties came to $28,325; today they stand at $18,225, 36% less.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Hager Companies averages $15,250 across 1 cited inspection.

Hager Companies also files yearly injury logs with OSHA, summarized below.

It reported 3 severe injuries to OSHA since 2015.

Hager Companies: OSHA citation items per year, 2003 to 2017
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

99employers cited

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch Hager Companies and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342564580 OPENED AUG 16, 2017Closed

Referral · Partial · Safety · 400 employees at the site · Closed Jan 3, 2018

150 Folmar Parkway, Hope Hull, AL 36043 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Aug 8, 2017: Employee's hand is injured when caught-in pinning machine

At approximately 10:00 a.m. on August 8, 2017, an employee was troubleshooting a PLC error on the pinning machine. The employee was adjusting a sensor by hand inside the disabled interlocked system of the pinning machine (Maromatic - Chen Young Automation Corp.) when his right hand was caught-in between the spring platform and the lock cylinder causing lacerations and cuts to his right hand. The employee was hospitalized and treated for his injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$12,675$7,625Sep 27, 2017Final
Citation 1, item 1b
29 CFR 1910.147(f)(1)(ii) · Lockout/tagout
Serious$0$0Sep 27, 2017Final
Citation 1, item 2
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$12,675$7,625Sep 27, 2017Final

Inspection 309976173 OPENED JUN 2, 2006Closed

Planned · Complete · Safety · 85 employees at the site · Closed Jun 5, 2006

U S Highway 78 W, Oxford, AL 36203 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 309976348 OPENED JUN 2, 2006Closed

Planned · Complete · Safety · 85 employees at the site · Closed Jun 5, 2006

U S Highway 78 W, Oxford, AL 36203 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 307832162 OPENED JUL 29, 2004Closed

Planned · Complete · Safety · 51 employees at the site · Closed Jul 29, 2004

200 County Court Ln., Montgomery, AL 36105 · Forging and Stamping · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 307148320 OPENED NOV 4, 2003Closed

Planned · Complete · Health · 320 employees at the site · Closed Mar 29, 2004

150 Folmar Parkway, Hope Hull, AL 36043 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.219(i)(2) · Belts, pulleys and power-transmission parts
Serious$1,700$1,700Feb 6, 2004Closed
Citation 2, item 1
29 CFR 1904.29(b)(1) · Injury and illness log
Other-than-serious$0$0Feb 6, 2004Closed

Inspection 306135070 OPENED JAN 7, 2003Closed

Unprogrammed related · Partial · Health · 420 employees at the site · Closed Aug 19, 2003

150 Folmar Parkway, Hope Hull, AL 36043 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.1030(c)(2)(i) · Bloodborne pathogens
Other-than-serious$1,275$0May 8, 2003Closed
Citation 1, item 1b
29 CFR 1910.1030(f)(2)(i) · Bloodborne pathogens
Serious$0$1,275May 8, 2003Closed
Citation 1, item 1c
29 CFR 1910.1030(g)(2)(i) · Bloodborne pathogens
Other-than-serious$0$0May 8, 2003Closed

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Montgomery site logged 6 recordable injuries or illnesses among about 271 workers: 2.1 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 2 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Hager Companies
Montgomery · 2025
271 612.12.7
Hager Companies - Montgomery Plant
Montgomery · 2022
255 632.22.7

Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 3 reports on file.

Nov 12, 2018, Hope Hull: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was loading a hinge leaf into the gang mill. When the clamps activated her right middle finger was caught between the clamp and the fixture and amputated above the third knuckle.

Aug 8, 2017, Hope Hull: Hospitalization · cuts, lacerations · hand(s), unspecified

While an employee was checking the cam on a PLC machine, the machine indexed and caught the employee's right hand between the spring platform and the lock cylinder, resulting in a laceration. The machine was not locked out or tagged out at the time.

Apr 29, 2015, Hope Hull: Amputation · amputations · finger(s), fingernail(s), n.e.c.

Employees were manually aligning 6"x6"x9' stainless steel beams weighing approximately 300 lbs on the tank stands. The injured employee and another employee were aligning beams in the same sequence on the same line. The supervisors were making the final adjustments when the employee attempted to help and his right little finger was pinched between the beam and the beam that was already in place.…

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.29 · Injury and illness log

29 CFR 1904.29(b)(1)

(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.

29 CFR 1910.1030 · Bloodborne pathogens

29 CFR 1910.1030(c)(2)(i)

(2) Exposure determination. (i) Each employer who has an employee(s) with occupational exposure as defined by paragraph (b) of this section shall prepare an exposure determination. This exposure determination shall contain the following:

29 CFR 1910.1030(f)(2)(i)

(2) Hepatitis B Vaccination. (i) Hepatitis B vaccination shall be made available after the employee has received the training required in paragraph (g)(2)(vii)(I) and within 10 working days of initial assignment to all employees who have occupational exposure unless the employee has previously received the complete hepatitis B vaccination series, antibody testing has revealed that the employee is immune, or the vaccine is contraindicated for medical reasons.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other hardware manufacturing employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.