OSHA SearchOSHA records by employer

Caliber Mold and Machine: OSHA inspections and violations

Akron, Ohio · Machine Shops · NAICS 332710

2inspections
16citation items
$18,600current penalties
May 13, 2019last inspection

Since 2017, OSHA inspectors have visited Caliber Mold and Machine in Ohio 2 times.

The most recent inspection opened on May 13, 2019 on a referral, in Akron.

In all, OSHA issued 16 citation items: 13 serious and 3 other-than-serious.

The proposed penalties came to $32,510; today they stand at $18,600, 43% less.

The rule cited most here is 1910.1200 (hazard communication), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Caliber Mold and Machine averages $9,300 across 2 cited inspections.

It reported 2 severe injuries to OSHA since 2015.

Caliber Mold and Machine: OSHA citation items per year, 2017 to 2019
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

273employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Caliber Mold and Machine and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344002779 OPENED MAY 13, 2019Closed

Referral · Partial · Safety · 20 employees at the site · Closed Apr 6, 2020

1461 Industrial Parkway, Akron, OH 44326 · Industrial Mold Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on May 8, 2019: Employee fractures ribs when sleeve is caught in vertical la

At 7:30 a.m. on May 8, 2019, an employee was working as a machinist for a firm that manufactured industrial molds. He was operating a vertical lathe. The lathe was a 60 inch (1.5 meter) Webster-Bennett vertical lathe boring mill, with serial number 5890-1. It ran approximately eight hours every day, and four to six days a week, depending on product demand. The lathe had a table that spun in operation. The table could operate at 3.8 to 83 revolutions per minute (rpm). On the day of the incident, the table was set to rotate at 25 rpm. The employee was setting up the jacks on the table to get a part ready to run. The center of table was full of metal chips. The employee cleaned the center of the table. The employee came out of the turntable area and turned the table on. There were still chips on the jack, causing the part not to sit flat on the table. The employee turned the table off again. He grabbed an air hose to blow the chips off the jack. The air hose hit the lever that turned the machine on. The table began to spin as the employee was reaching across the table to blow away the chips. The air hose and the employee's sleeve were caught by the table, and the employee was pulled into the machine. He suffered six broken ribs. He was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(d)(2) · Lockout/tagout
Serious$5,304$3,900Jun 20, 2019Final

Inspection 342195278 OPENED MAR 22, 2017Closed

Complaint · Partial · Safety · 20 employees at the site · Closed Mar 12, 2019

1461 Industrial Parkway, Akron, OH 44326 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 2
29 CFR 1910.134(c)(2)(ii) · Respiratory protection
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 3
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$4,346$2,526May 19, 2017Final
Citation 1, item 4
29 CFR 1910.178(l)(2)(ii) · Forklifts and other powered industrial trucks
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 5a
29 CFR 1910.179(j)(2) · Overhead and gantry cranes
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 5b
29 CFR 1910.179(l)(3)(iii)(d) · Overhead and gantry cranes
Serious$0$0May 19, 2017Final
Citation 1, item 6
29 CFR 1910.212(a)(1) · Machine guarding
Serious$5,070$3,000May 19, 2017Final
Citation 1, item 7
29 CFR 1910.242(b) · Hand and power tools
Serious$4,346$2,526May 19, 2017Final
Citation 1, item 8
29 CFR 1910.305(g)(2)(iii) · Electrical wiring methods
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 9a
29 CFR 1910.1200(e)(1) · Hazard communication
Serious$2,173$1,108May 19, 2017Final
Citation 1, item 9b
29 CFR 1910.1200(g)(1) · Hazard communication
Serious$0$0May 19, 2017Final
Citation 1, item 9c
29 CFR 1910.1200(h)(1) · Hazard communication
Serious$0$0May 19, 2017Final
Citation 2, item 1
29 CFR 1910.37(b)(5) · Exit routes
Other-than-serious$0$0May 19, 2017Final
Citation 2, item 2
29 CFR 1910.132(f)(1) · Personal protective equipment, general requirements
Other-than-serious$0$0May 19, 2017Final
Citation 2, item 3
29 CFR 1910.134(k)(6) · Respiratory protection
Other-than-serious$406$0May 19, 2017Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

May 8, 2019, Akron: Hospitalization · fractures · chest, except internal location of diseases or disorders

An employee was blowing chips off his machine when the machine was turned on and started to spin. The employee was repeatedly struck by the table chucks and suffered six broken ribs.

Apr 21, 2018, Akron: Hospitalization · fractures · eye(s)

An employee was cleaning a part with an air hose when part of the air hose broke off and struck him in the face, fracturing his right eye socket. He was hospitalized.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(e)(1)

(e) Written hazard communication program. (1) Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:

29 CFR 1910.1200(g)(1)

(g) Safety data sheets. (1) Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use.

29 CFR 1910.1200(h)(1)

(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.212 · Machine guarding

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.37 · Exit routes

Other machine shops employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.